2010 Dodge Ram 1500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Ram 1500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 19 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2010 Ram 1500 Regular Cab — Year-Specific Fitment Context
The 2010 model year is the final year of the Dodge Ram 1500 Regular Cab's 5x139.7 bolt pattern run (since 1994). Wheels from any 1994–2010 Dodge Ram 1500 Regular Cab are cross-compatible with the 2010 model.
Dodge Ram 1500 Regular Cab Bolt Pattern by Year
The table below shows how the Ram 1500 Regular Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x139.7 | 77.8 | 19 |
| 1995 | 5x139.7 | 77.8 | 19 |
| 1996 | 5x139.7 | 77.8 | 19 |
| 1997 | 5x139.7 | 77.8 | 19 |
| 1998 | 5x139.7 | 77.8 | 19 |
| 1999 | 5x139.7 | 77.8 | 19 |
| 2000 | 5x139.7 | 77.8 | 19 |
| 2001 | 5x139.7 | 77.8 | 19 |
| 2002 | 5x139.7 | 77.8 | 19 |
| 2003 | 5x139.7 | 77.8 | 19 |
| 2004 | 5x139.7 | 77.8 | 19 |
| 2005 | 5x139.7 | 77.8 | 19 |
| 2006 | 5x139.7 | 77.8 | 19 |
| 2007 | 5x139.7 | 77.8 | 19 |
| 2008 | 5x139.7 | 77.8 | 19 |
| 2009 | 5x139.7 | 77.8 | 19 |
| ▸ 2010 | 5x139.7 | 77.8 | 19 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2010 Dodge Ram 1500 Regular Cab
For your 2010 Dodge Ram 1500 Regular Cab, the 5x139.7 bolt pattern is shared with 1994–2010 models, ensuring cross-compatibility. However, the 77.8mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure load support. The offset is sensitive: stock is 19mm; deviations affect scrub radius and clearance. Use 9/16" lug nuts with correct thread pitch (likely 9/16-18) and verify seat type—factory uses cone seat; aftermarket may require ball or tapered seats. Always re-torque after 50 miles. Avoid wheels with insufficient backspacing to prevent rubbing on suspension or body.
Historical Fitment Data Reference
In our dataset, Dodge Ram 1500 Regular Cab appears from 1994 to 2010 (17 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 135 ft-lbs after 50 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore ≥77.8mm; use hub-centric rings if larger.
- ✅ Check offset carefully: +19mm is stock; going lower (e.g., 0mm) may cause tire rub on fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Dodge Ram 1500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Ram 1500 Regular Cab?
The 2010 Dodge Ram 1500 Regular Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 19mm.
What other years of Dodge Ram 1500 Regular Cab have the same bolt pattern as the 2010?
The Dodge Ram 1500 Regular Cab uses the 5x139.7 pattern from 1994 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Dodge Ram 1500 Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Ram 1500 Regular Cab, the PCD is 5x139.7.
What lug nut size does the 2010 Dodge Ram 1500 Regular Cab use?
The 2010 Dodge Ram 1500 Regular Cab uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 77.8mm center bore important for the 2010 Ram 1500 Regular Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2010 Dodge Ram 1500 Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 19mm, and a center bore of at least 77.8mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset