2008 Dodge Sprinter 3500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Sprinter 3500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 25 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2008 Sprinter 3500 Cargo — Year-Specific Fitment Context
The 2008 model year is the final year of the Dodge Sprinter 3500 Cargo's 8x165.1 bolt pattern run (since 2003). Wheels from any 2003–2008 Dodge Sprinter 3500 Cargo are cross-compatible with the 2008 model.
Dodge Sprinter 3500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 3500 Cargo's wheel specifications have changed over the years. The 2008 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2008 Dodge Sprinter 3500 Cargo
For your 2008 Dodge Sprinter 3500 Cargo, the 8x165.1 bolt pattern and 121.3mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The offset is sensitive: stock is 25mm; deviations affect scrub radius and tire clearance. Always use the correct 9/16-18 lug nuts with the proper seat (cone or ball) to avoid loosening. Re-torque after 50 miles. Verify wheel load rating meets or exceeds the Sprinter's heavy-duty requirements.
Historical Fitment Data Reference
In our dataset, Dodge Sprinter 3500 Cargo appears from 2003 to 2008 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (plastic or aluminum) for aftermarket wheels to match the 121.3mm bore; avoid lug-centric mounting.
- ✅ Stick to offset within ±5mm of 25mm to prevent rubbing on suspension or body components.
- ✅ Re-torque lug nuts to 140-150 ft-lbs after 50 miles of driving; check for correct thread pitch (9/16-18) and seat type.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Sprinter 3500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Sprinter 3500 Cargo?
The 2008 Dodge Sprinter 3500 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 25mm.
What other years of Dodge Sprinter 3500 Cargo have the same bolt pattern as the 2008?
The Dodge Sprinter 3500 Cargo uses the 8x165.1 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the center bore of a 2008 Dodge Sprinter 3500 Cargo?
The factory center bore (hub bore) for the 2008 Dodge Sprinter 3500 Cargo is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 25mm offset mean for the 2008 Sprinter 3500 Cargo?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
How tight should I torque the lug nuts on a 2008 Dodge Sprinter 3500 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 9/16 18 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2008 Dodge Sprinter 3500 Cargos use lug bolts or lug nuts?
The 2008 Sprinter 3500 Cargo requires 9/16 18 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset