2002 Dodge Viper Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Dodge Viper, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 front, 70 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2002 Viper — Year-Specific Fitment Context
The 2002 Dodge Viper is in year 11 of 26 using the 6x114.3 pattern (1992–2017). Wheels from any 1992–2017 Dodge Viper are cross-compatible with the 2002 model.
Dodge Viper Bolt Pattern by Year
The table below shows how the Viper's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1993 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1994 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1995 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1996 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1997 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1998 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1999 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2000 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2001 | 6x114.3 | 71.6 | 50 front, 70 rear |
| ▸ 2002 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2003 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2004 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2005 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2006 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2008 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2009 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2010 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2015 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2016 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2017 | 6x114.3 | 71.6 | 50 front, 70 rear |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2002 Dodge Viper
For your 2002 Dodge Viper, the 6x114.3 bolt pattern is shared across 1992–2017 models, enabling cross-compatibility. However, the 71.6mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is highly sensitive—front wheels need ~50mm offset, rear ~70mm; deviations can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2"-20 UNF) and proper seat type (conical or ball seat, matching the wheel). Never mix seat types, as this can lead to wheel loosening. Re-torque after 50-100 miles and periodically thereafter.
Historical Fitment Data Reference
In our dataset, Dodge Viper appears from 1992 to 2017 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50-100 miles, then check every tire rotation.
- ✅ Avoid using universal fit wheels without hub-centric rings; the Viper's hub is load-bearing.
- ✅ Verify offset with a test fit; rear wheels with offset below 65mm may contact the fender.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Dodge Viper — Frequently Asked Questions
What is the bolt pattern for a 2002 Dodge Viper?
The 2002 Dodge Viper uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50 front, 70 rearmm.
What other years of Dodge Viper have the same bolt pattern as the 2002?
The Dodge Viper uses the 6x114.3 pattern from 1992 through 2017. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What does 50 front, 70 rearmm offset mean for the 2002 Viper?
An offset of 50 front, 70 rearmm means the wheel's mounting surface is 50 front, 70 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
What is the PCD for a 2002 Dodge Viper?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 Viper, the PCD is 6x114.3.
What is the factory wheel offset for a 2002 Dodge Viper?
The OEM offset for the 2002 Viper is typically around 50 front, 70 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2002 Dodge Vipers use lug bolts or lug nuts?
The 2002 Viper requires N 1/2" (20 UNF) hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset