2008 Dodge Viper Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Viper, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 front, 70 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Viper — Year-Specific Fitment Context
The 2008 Dodge Viper is in year 17 of 26 using the 6x114.3 pattern (1992–2017). Wheels from any 1992–2017 Dodge Viper are cross-compatible with the 2008 model.
Dodge Viper Bolt Pattern by Year
The table below shows how the Viper's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1993 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1994 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1995 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1996 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1997 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1998 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1999 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2000 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2001 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2002 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2003 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2004 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2005 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2006 | 6x114.3 | 71.6 | 50 front, 70 rear |
| ▸ 2008 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2009 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2010 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2015 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2016 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2017 | 6x114.3 | 71.6 | 50 front, 70 rear |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2008 Dodge Viper
For your 2008 Dodge Viper, the 71.6mm center bore is critical—aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: front 50mm, rear 70mm. Straying more than ±5mm can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2"-20 UNF) and seat type (conical/60-degree). Never use ball-seat or acorn nuts; they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Viper appears from 1992 to 2017 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving, then periodically check.
- ✅ Avoid using wheel spacers; they alter offset and can stress hubs. If needed, use hub-centric spacers with extended studs.
- ✅ Verify aftermarket wheels clear the massive brake calipers—some designs require specific spoke profiles.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Viper — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Viper?
The 2008 Dodge Viper uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50 front, 70 rearmm.
What other years of Dodge Viper have the same bolt pattern as the 2008?
The Dodge Viper uses the 6x114.3 pattern from 1992 through 2017. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Dodge Viper?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 50 front, 70 rearmm, and a center bore of at least 71.6mm (using hub rings if larger).
What lug nut size does the 2008 Dodge Viper use?
The 2008 Dodge Viper uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2008 Dodge Viper?
The factory center bore (hub bore) for the 2008 Dodge Viper is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2008 Dodge?
The 2008 Viper uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset