2010 Dodge Viper Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Dodge Viper, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 front, 70 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Viper — Year-Specific Fitment Context
The 2010 Dodge Viper is in year 19 of 26 using the 6x114.3 pattern (1992–2017). Wheels from any 1992–2017 Dodge Viper are cross-compatible with the 2010 model.
Dodge Viper Bolt Pattern by Year
The table below shows how the Viper's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1993 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1994 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1995 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1996 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1997 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1998 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1999 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2000 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2001 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2002 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2003 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2004 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2005 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2006 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2008 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2009 | 6x114.3 | 71.6 | 50 front, 70 rear |
| ▸ 2010 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2015 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2016 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2017 | 6x114.3 | 71.6 | 50 front, 70 rear |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2010 Dodge Viper
The 2010 Dodge Viper uses a 6x114.3 bolt pattern with a critical 71.6mm center bore. Aftermarket wheels often have a larger bore; hub-centric rings are mandatory to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is highly sensitive: front wheels require 50mm offset, rear 70mm. Using incorrect offset can cause rubbing or clearance issues. Always verify lug nut thread pitch: 1/2"-20 UNF. Use only conical or ball-seat lug nuts matching the wheel's seat type. Improper seat engagement can lead to wheel loss. Re-torque after 50-100 miles and periodically thereafter.
Historical Fitment Data Reference
In our dataset, Dodge Viper appears from 1992 to 2017 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 71.6mm bore is unique.
- ✅ Check rear offset carefully; 70mm is aggressive and aftermarket wheels may require spacers or different offset.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Dodge Viper — Frequently Asked Questions
What is the bolt pattern for a 2010 Dodge Viper?
The 2010 Dodge Viper uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50 front, 70 rearmm.
What other years of Dodge Viper have the same bolt pattern as the 2010?
The Dodge Viper uses the 6x114.3 pattern from 1992 through 2017. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2010 Dodge Viper?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" (20 UNF) hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2010 Dodge Viper?
The OEM offset for the 2010 Viper is typically around 50 front, 70 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2010 Dodge Viper?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Viper, the PCD is 6x114.3.
What lug nut size does the 2010 Dodge Viper use?
The 2010 Dodge Viper uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset