2017 Dodge Viper Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Dodge Viper, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 front, 70 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Viper — Year-Specific Fitment Context
The 2017 model year is the final year of the Dodge Viper's 6x114.3 bolt pattern run (since 1992). Wheels from any 1992–2017 Dodge Viper are cross-compatible with the 2017 model.
Dodge Viper Bolt Pattern by Year
The table below shows how the Viper's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1993 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1994 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1995 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1996 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1997 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1998 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 1999 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2000 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2001 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2002 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2003 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2004 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2005 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2006 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2008 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2009 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2010 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2015 | 6x114.3 | 71.6 | 50 front, 70 rear |
| 2016 | 6x114.3 | 71.6 | 50 front, 70 rear |
| ▸ 2017 | 6x114.3 | 71.6 | 50 front, 70 rear |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2017 Dodge Viper
For the 2017 Dodge Viper, the 6x114.3 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the studs. Offset is sensitive: front 50mm, rear 70mm. Deviating more than 5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (1/2"-20 UNF) and seat type—factory uses cone seat. Mixing ball or flat seats risks loosening. Re-torque after 50 miles. This final year shares compatibility with all 1992–2017 Vipers, but verify offset for your specific model.
Historical Fitment Data Reference
In our dataset, Dodge Viper appears from 1992 to 2017 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 71.6mm without hub-centric rings; otherwise, vibrations and stud stress may occur.
- ✅ Check offset carefully: front offsets below 45mm may rub the fender, rear above 75mm may contact the suspension.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Dodge Viper — Frequently Asked Questions
What is the bolt pattern for a 2017 Dodge Viper?
The 2017 Dodge Viper uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50 front, 70 rearmm.
What other years of Dodge Viper have the same bolt pattern as the 2017?
The Dodge Viper uses the 6x114.3 pattern from 1992 through 2017. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2017 Dodge?
The 2017 Viper uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2017 Dodge Viper?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Viper, the PCD is 6x114.3.
What does 50 front, 70 rearmm offset mean for the 2017 Viper?
An offset of 50 front, 70 rearmm means the wheel's mounting surface is 50 front, 70 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
What lug nut size does the 2017 Dodge Viper use?
The 2017 Dodge Viper uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset