1994 Eagle Vision Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Eagle Vision, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Vision — Year-Specific Fitment Context
The 1994 Eagle Vision is in year 2 of 5 using the 5x114.3 pattern (1993–1997). Wheels from any 1993–1997 Eagle Vision are cross-compatible with the 1994 model.
Eagle Vision Bolt Pattern by Year
The table below shows how the Vision's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Eagle Vision
For your 1994 Eagle Vision, the 5x114.3 bolt pattern is shared with 1993–1997 models, ensuring cross-compatibility. However, the 71.5mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 35-45mm; deviating outside this can cause rubbing or clearance issues. Always use M12x1.5 lug nuts with the correct seat type (cone or ball) matching your wheels. Improper seat can lead to loosening or wheel failure. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Eagle Vision appears from 1993 to 1997 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 71.5mm to avoid vibration.
- ✅ Stick to offset between 35-45mm; lower offsets may rub fenders, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Eagle Vision — Frequently Asked Questions
What is the bolt pattern for a 1994 Eagle Vision?
The 1994 Eagle Vision uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 35-45mmmm.
What other years of Eagle Vision have the same bolt pattern as the 1994?
The Eagle Vision uses the 5x114.3 pattern from 1993 through 1997. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the center bore of a 1994 Eagle Vision?
The factory center bore (hub bore) for the 1994 Eagle Vision is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1994 Eagle Vision?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1994 Eagle Vision?
The OEM offset for the 1994 Vision is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Eagle fit my 1994 Vision?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset