1997 Eagle Vision Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Eagle Vision, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Vision — Year-Specific Fitment Context
The 1997 model year is the final year of the Eagle Vision's 5x114.3 bolt pattern run (since 1993). Wheels from any 1993–1997 Eagle Vision are cross-compatible with the 1997 model.
Eagle Vision Bolt Pattern by Year
The table below shows how the Vision's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Eagle Vision
For your 1997 Eagle Vision, the 5x114.3 bolt pattern is shared with many vehicles, but the 71.5mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat type—factory uses cone seat (60-degree). Never mix seat types; improper seating can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Eagle Vision appears from 1993 to 1997 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore (e.g., 73.1mm) to avoid vibrations.
- ✅ Stick to offset 35-45mm; lower offset may rub fenders, higher may contact suspension.
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Eagle Vision — Frequently Asked Questions
What is the bolt pattern for a 1997 Eagle Vision?
The 1997 Eagle Vision uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 35-45mmmm.
What other years of Eagle Vision have the same bolt pattern as the 1997?
The Eagle Vision uses the 5x114.3 pattern from 1993 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1997 Eagle?
The 1997 Vision uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 1997 Eagle Vision?
The OEM offset for the 1997 Vision is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 1997 Eagle Vision?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Vision, the PCD is 5x114.3.
Can I put aftermarket wheels on my 1997 Eagle Vision?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 71.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset