2009 Ferrari 430 Scuderia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Ferrari 430 Scuderia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 430 Scuderia — Year-Specific Fitment Context
The 2009 model year is the final year of the Ferrari 430 Scuderia's 5x108 bolt pattern run (since 2008). Wheels from any 2008–2009 Ferrari 430 Scuderia are cross-compatible with the 2009 model.
Ferrari 430 Scuderia Bolt Pattern by Year
The table below shows how the 430 Scuderia's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x108 | 67.1 | 45 |
| ▸ 2009 | 5x108 | 67.1 | 45 |
Fitment Notes
The 2009 Ferrari 430 Scuderia has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ferrari 430 Scuderia appears from 2008 to 2009 (2 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2009 Ferrari 430 Scuderia — Frequently Asked Questions
What is the bolt pattern for a 2009 Ferrari 430 Scuderia?
The 2009 Ferrari 430 Scuderia uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Ferrari 430 Scuderia have the same bolt pattern as the 2009?
The Ferrari 430 Scuderia uses the 5x108 pattern from 2008 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the factory wheel offset for a 2009 Ferrari 430 Scuderia?
The OEM offset for the 2009 430 Scuderia is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 45mm offset mean for the 2009 430 Scuderia?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
Will wheels from another Ferrari fit my 2009 430 Scuderia?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2009 Ferrari 430 Scuderia?
The factory center bore (hub bore) for the 2009 Ferrari 430 Scuderia is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ferrari 430 Scuderia is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2008-2009 (2 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Ferrari 430 Scuderia, please report it via our About page contact so we can verify and update this record.