2014 Ferrari 458 Italia Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ferrari 458 Italia, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 front, 58 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 458 Italia — Year-Specific Fitment Context
The 2014 Ferrari 458 Italia is in year 5 of 6 using the 5x114.3 pattern (2010–2015). Wheels from any 2010–2015 Ferrari 458 Italia are cross-compatible with the 2014 model.
Ferrari 458 Italia Bolt Pattern by Year
The table below shows how the 458 Italia's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Ferrari 458 Italia
For your 2014 Ferrari 458 Italia, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels require hub-centric rings to avoid vibrations and ensure proper load distribution. Offset is sensitive: front 45mm, rear 58mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone or ball seat). Mismatched hardware can lead to wheel detachment. Verify that aftermarket wheels are load-rated for the 458's weight and performance. Professional installation and torque to spec (recommended 90-100 lb-ft) are mandatory.
Historical Fitment Data Reference
In our dataset, Ferrari 458 Italia appears from 2010 to 2015 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific to Ferrari.
- ✅ Check inner clearance for aftermarket wheels; the 458's brake calipers are large and may require spacers or specific spoke designs.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ferrari 458 Italia — Frequently Asked Questions
What is the bolt pattern for a 2014 Ferrari 458 Italia?
The 2014 Ferrari 458 Italia uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45 front, 58 rearmm.
What other years of Ferrari 458 Italia have the same bolt pattern as the 2014?
The Ferrari 458 Italia uses the 5x114.3 pattern from 2010 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What lug nut size does the 2014 Ferrari 458 Italia use?
The 2014 Ferrari 458 Italia uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2014 Ferrari 458 Italias use lug bolts or lug nuts?
The 2014 458 Italia requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 45 front, 58 rearmm offset mean for the 2014 458 Italia?
An offset of 45 front, 58 rearmm means the wheel's mounting surface is 45 front, 58 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
What is the center bore of a 2014 Ferrari 458 Italia?
The factory center bore (hub bore) for the 2014 Ferrari 458 Italia is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset