2009 Ferrari California Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Ferrari California, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 front, 53 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2009 California — Year-Specific Fitment Context
The 2009 model year marks the beginning of the Ferrari California's 5x114.3 bolt pattern era, which continued through 2017 (9 consecutive years). Wheels from any 2009–2017 Ferrari California are cross-compatible with the 2009 model.
Ferrari California Bolt Pattern by Year
The table below shows how the California's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2009 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2010 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2011 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2012 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2013 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2014 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2015 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2016 | 5x114.3 | 67.1 | 44 front, 53 rear |
| 2017 | 5x114.3 | 67.1 | 44 front, 53 rear |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2009 Ferrari California
For your 2009 Ferrari California, the 5x114.3 bolt pattern is shared with 2009–2017 models, but critical dimensions vary. The center bore is 67.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: front 44mm, rear 53mm. Straying beyond ±5mm risks rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mismatched seats can cause wheel loosening. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Ferrari California appears from 2009 to 2017 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 9.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels may require hub-centric rings (67.1mm to 73.1mm or other) to match the 67.1mm center bore.
- ✅ Check inner clearance for brake calipers; the California's large brakes can interfere with certain wheel designs.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Ferrari California — Frequently Asked Questions
What is the bolt pattern for a 2009 Ferrari California?
The 2009 Ferrari California uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44 front, 53 rearmm.
What other years of Ferrari California have the same bolt pattern as the 2009?
The Ferrari California uses the 5x114.3 pattern from 2009 through 2017. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Do 2009 Ferrari Californias use lug bolts or lug nuts?
The 2009 California requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2009 Ferrari?
The 2009 California uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2009 Ferrari California?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44 front, 53 rearmm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2009 Ferrari California?
The OEM offset for the 2009 California is typically around 44 front, 53 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset