2009 Ferrari F430 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Ferrari F430, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 30 front, 40 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 F430 — Year-Specific Fitment Context
The 2009 model year is the final year of the Ferrari F430's 5x108 bolt pattern run (since 2006). Wheels from any 2006–2009 Ferrari F430 are cross-compatible with the 2009 model.
Ferrari F430 Bolt Pattern by Year
The table below shows how the F430's wheel specifications have changed over the years. The 2009 model year is highlighted.
Fitment Notes
The 2009 Ferrari F430 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ferrari F430 appears from 2006 to 2009 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2009 Ferrari F430 — Frequently Asked Questions
What is the bolt pattern for a 2009 Ferrari F430?
The 2009 Ferrari F430 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 30 front, 40 rearmm.
What other years of Ferrari F430 have the same bolt pattern as the 2009?
The Ferrari F430 uses the 5x108 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the center bore of a 2009 Ferrari F430?
The factory center bore (hub bore) for the 2009 Ferrari F430 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2009 Ferrari F430?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2009 Ferrari F430?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
What does 30 front, 40 rearmm offset mean for the 2009 F430?
An offset of 30 front, 40 rearmm means the wheel's mounting surface is 30 front, 40 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ferrari F430 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2006-2009 (4 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 10.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Ferrari F430, please report it via our About page contact so we can verify and update this record.