2024 Ferrari Roma Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Ferrari Roma is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2024 Ferrari Roma Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Roma — Year-Specific Fitment Context
The 2024 Ferrari Roma is in year 4 of 6 using the 5x114.3 pattern (2021–2026). Wheels from any 2021–2026 Ferrari Roma are cross-compatible with the 2024 model.
Ferrari Roma Bolt Pattern by Year
Looking for all generations? View the complete Ferrari Roma (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the Roma's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Ferrari Roma Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2024 Ferrari Roma, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Kia Niro Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2007 Kia Optima | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2020 Kia Optima Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Kia Optima Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2018 Kia Rio | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2016 Kia Sedona | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Ferrari Roma — Frequently Asked Questions
What is the bolt pattern for a 2024 Ferrari Roma?
The 2024 Ferrari Roma uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Ferrari Roma have the same bolt pattern as the 2024?
The Ferrari Roma uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the PCD for a 2024 Ferrari Roma?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Roma, the PCD is 5x114.3.
Do 2024 Ferrari Romas use lug bolts or lug nuts?
The 2024 Roma requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2024 Ferrari Roma use?
The 2024 Ferrari Roma uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2024 Ferrari Roma?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →