2015 FIAT 500L Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 FIAT 500L, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 37 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 500L — Year-Specific Fitment Context
The 2015 FIAT 500L is in year 2 of 7 using the 5x98 pattern (2014–2020). Wheels from any 2014–2020 FIAT 500L are cross-compatible with the 2015 model.
FIAT 500L Bolt Pattern by Year
The table below shows how the 500L's wheel specifications have changed over the years. The 2015 model year is highlighted.
Fitment Notes
The 2015 FIAT 500L has a bolt pattern of 5x98.
This means it is a 5 lug pattern with a circle diameter of 98mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, FIAT 500L appears from 2014 to 2020 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
5x98 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x98:
2015 FIAT 500L — Frequently Asked Questions
What is the bolt pattern for a 2015 FIAT 500L?
The 2015 FIAT 500L uses a 5x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 37mm.
What other years of FIAT 500L have the same bolt pattern as the 2015?
The FIAT 500L uses the 5x98 pattern from 2014 through 2020. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What is the center bore of a 2015 FIAT 500L?
The factory center bore (hub bore) for the 2015 FIAT 500L is 58.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2015 FIAT?
The 2015 500L uses a 5x98 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 58.1mm center bore important for the 2015 500L?
The 58.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2015 FIAT 500L?
Absolutely. Just ensure the aftermarket wheels have a 5x98 bolt pattern, an offset near 37mm, and a center bore of at least 58.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
FIAT 500L is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2020 (7 model years).
- Observed bolt-pattern variants: 1 (5x98).
- Observed total offset span across years: 3.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2015 FIAT 500L, please report it via our About page contact so we can verify and update this record.