2019 FIAT 500L Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 FIAT 500L, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x98 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 500L — Year-Specific Fitment Context
The 2019 FIAT 500L is in year 6 of 7 using the 5x98 pattern (2014–2020). Wheels from any 2014–2020 FIAT 500L are cross-compatible with the 2019 model.
FIAT 500L Bolt Pattern by Year
The table below shows how the 500L's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x98 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x98:
Expert Buying Guide for 2019 FIAT 500L
For the 2019 FIAT 500L, the bolt pattern is 5x98 with a center bore of 58.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is critical; the factory offset is 40mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 12x1.25, and the seat type (cone or ball) must match the wheel. Improper lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, FIAT 500L appears from 2014 to 2020 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 58.1mm without hub-centric rings.
- ✅ Check for clearance with brake calipers and suspension components when changing offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 FIAT 500L — Frequently Asked Questions
What is the bolt pattern for a 2019 FIAT 500L?
The 2019 FIAT 500L uses a 5x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 40mm.
What other years of FIAT 500L have the same bolt pattern as the 2019?
The FIAT 500L uses the 5x98 pattern from 2014 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 FIAT 500L?
Absolutely. Just ensure the aftermarket wheels have a 5x98 bolt pattern, an offset near 40mm, and a center bore of at least 58.1mm (using hub rings if larger).
Do 2019 FIAT 500Ls use lug bolts or lug nuts?
The 2019 500L requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 58.1mm center bore important for the 2019 500L?
The 58.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2019 FIAT 500L?
The factory center bore (hub bore) for the 2019 FIAT 500L is 58.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset