2024 Ford Bronco Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Ford Bronco, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 93.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 Bronco — Year-Specific Fitment Context
The 2024 model year is the final year of the Ford Bronco's 6x139.7 bolt pattern run (since 2021). Wheels from any 2021–2024 Ford Bronco are cross-compatible with the 2024 model. Across its full production run (1992–2024), the Bronco has also used: 5x139.7.
Ford Bronco Bolt Pattern by Year
The table below shows how the Bronco's wheel specifications have changed over the years. The 2024 model year is highlighted.
Fitment Notes
The 2024 Ford Bronco has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Bronco appears from 1992 to 2024 (9 model years).
Across model years, this model appears with 2 bolt patterns (5x139.7, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 55.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2024 Ford Bronco — Frequently Asked Questions
What is the bolt pattern for a 2024 Ford Bronco?
The 2024 Ford Bronco uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 93.1mm and the offset is 55mm.
What other years of Ford Bronco have the same bolt pattern as the 2024?
The Ford Bronco uses the 6x139.7 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Ford Bronco use?
The 2024 Ford Bronco uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2024 Ford Bronco?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Bronco, the PCD is 6x139.7.
How tight should I torque the lug nuts on a 2024 Ford Bronco?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2024 Ford Bronco?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 55mm, and a center bore of at least 93.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Ford Bronco has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (9 model years).
- Observed bolt-pattern variants: 2 (5x139.7, 6x139.7).
- Observed total offset span across years: 55.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Ford Bronco, please report it via our About page contact so we can verify and update this record.