2026 Ford Bronco Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Bronco is 6x139.7 (6x5.5"). It has a center bore of 93.1 mm, an offset range of 30-55, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).

2026 Ford Bronco Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Center Bore (Hub Bore) 93.1 mm
Offset Range (ET) 30-55
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 100 ft-lbs (135 Nm)
💡

Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Bronco — Year-Specific Fitment Context

The 2026 model year is the final year of the Ford Bronco's 6x139.7 bolt pattern run (since 2021). Wheels from any 2021–2026 Ford Bronco are cross-compatible with the 2026 model. Across its full production run (1992–2026), the Bronco has also used: 5x139.7.

Ford Bronco Bolt Pattern by Year

Looking for all generations? View the complete Ford Bronco (1992–2026) Bolt Pattern & Generation Guide →

The table below shows how the Bronco's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x139.7 108.0 0
1993 5x139.7 108.0 0
1994 5x139.7 108.0 0
1995 5x139.7 108.0 0
1996 5x139.7 108.0 0
2021 6x139.7 93.1 55
2022 6x139.7 93.1 55
2023 6x139.7 93.1 55
2024 6x139.7 93.1 55
2025 6x139.7 93.1 30-55
▸ 2026 6x139.7 93.1 30-55

2026 Ford Bronco Wheel Interchange & Donor Fitment Guide (6x139.7)

The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Ford Bronco, donor rims must match the 6x139.7 PCD and have a center bore of at least 93.1 mm:

DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 93.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
1997 MAZDA B-Series Cab Plus 93.1 mm (Exact) 25 N 12x1.50 (Cone)
1997 MAZDA B-Series Regular Cab 93.1 mm (Exact) 25 N 12x1.50 (Cone)
2025 Ford Ranger 93.1 mm (Exact) 55 14x1.5 (Flat)
2019 Ford Ranger SuperCab 93.1 mm (Exact) 55 12x1.5 (Cone)
2024 Ford Ranger SuperCrew 93.1 mm (Exact) 55 12x1.5 (Cone)
2005 MAZDA B-Series Extended Cab 93.1 mm (Exact) 25 N 12x1.50 (Cone)

HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Isuzu NPR 110 mm 110mm → 93.1mm Not Applicable
2025 Isuzu NPR-HD 110 mm 110mm → 93.1mm Not Applicable
2008 Lexus GX 106.1 mm 106.1mm → 93.1mm 25
2022 Lexus LX 95.1 mm 95.1mm → 93.1mm 60
2006 Nissan Armada 110.1 mm 110.1mm → 93.1mm 24
1994 Nissan Pathfinder 110.0 mm 110.0mm → 93.1mm 40
Looking for all models? View the complete directory of vehicles with 6x139.7 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Ford Bronco — Frequently Asked Questions

What is the bolt pattern for a 2026 Ford Bronco?

The 2026 Ford Bronco uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 93.1mm and the offset is 30-55mm.

What other years of Ford Bronco have the same bolt pattern as the 2026?

The Ford Bronco uses the 6x139.7 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Can I put aftermarket wheels on my 2026 Ford Bronco?

Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 30-55mm, and a center bore of at least 93.1mm (using hub rings if larger).

How tight should I torque the lug nuts on a 2026 Ford Bronco?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What lug nut size does the 2026 Ford Bronco use?

The 2026 Ford Bronco uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Will wheels from another Ford fit my 2026 Bronco?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 93.1mm.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Ford Bronco By Year

1992 1993 1994 1995 1996 2021 2022 2023 2024 2025 2026

Other Ford Models

Aerostar Passenger Aspire Bronco C-MAX Hybrid E-Transit 350 Cargo Van E150 Cargo E150 Passenger E250 Cargo Econoline E150 Cargo Econoline E350 Super Duty Passenger Explorer Sport F350 Crew Cab Five Hundred Flex GT MKII Ranger Regular Cab Transit 150 Crew Van Transit 250 Crew Van Transit 350 Crew Van Transit 350 Wagon

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)