2025 Ford Bronco Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford Bronco is 6x139.7 (6x5.5"). It has a center bore of 93.1 mm, an offset range of 30-55, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2025 Ford Bronco Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 93.1 mm |
| Offset Range (ET) | 30-55 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2025 Bronco — Year-Specific Fitment Context
The 2025 Ford Bronco is in year 5 of 6 using the 6x139.7 pattern (2021–2026). Wheels from any 2021–2026 Ford Bronco are cross-compatible with the 2025 model. Across its full production run (1992–2026), the Bronco has also used: 5x139.7.
Ford Bronco Bolt Pattern by Year
Looking for all generations? View the complete Ford Bronco (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the Bronco's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Ford Bronco Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2025 Ford Bronco, donor rims must match the 6x139.7 PCD and have a center bore of at least 93.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 93.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1997 MAZDA B-Series Cab Plus | 93.1 mm (Exact) | 25 | N 12x1.50 (Cone) |
| 1997 MAZDA B-Series Regular Cab | 93.1 mm (Exact) | 25 | N 12x1.50 (Cone) |
| 2025 Ford Ranger | 93.1 mm (Exact) | 55 | 14x1.5 (Flat) |
| 2019 Ford Ranger SuperCab | 93.1 mm (Exact) | 55 | 12x1.5 (Cone) |
| 2024 Ford Ranger SuperCrew | 93.1 mm (Exact) | 55 | 12x1.5 (Cone) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Isuzu NPR | 110 mm | 110mm → 93.1mm |
Not Applicable |
| 2025 Isuzu NPR-HD | 110 mm | 110mm → 93.1mm |
Not Applicable |
| 2008 Lexus GX | 106.1 mm | 106.1mm → 93.1mm |
25 |
| 2022 Lexus LX | 95.1 mm | 95.1mm → 93.1mm |
60 |
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 93.1mm |
24 |
| 1994 Nissan Pathfinder | 110.0 mm | 110.0mm → 93.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ford Bronco — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford Bronco?
The 2025 Ford Bronco uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 93.1mm and the offset is 30-55mm.
What other years of Ford Bronco have the same bolt pattern as the 2025?
The Ford Bronco uses the 6x139.7 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Ford Bronco?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Ford fit my 2025 Bronco?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 93.1mm.
Can I use spacers on my 2025 Ford Bronco?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 93.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Why is matching the 93.1mm center bore important for the 2025 Bronco?
The 93.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →