2006 Ford E250 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Ford E250 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2006 E250 Super Duty Cargo — Year-Specific Fitment Context
The 2006 Ford E250 Super Duty Cargo is in year 4 of 5 using the 8x165.1 pattern (2003–2007). Wheels from any 2003–2007 Ford E250 Super Duty Cargo are cross-compatible with the 2006 model.
Ford E250 Super Duty Cargo Bolt Pattern by Year
The table below shows how the E250 Super Duty Cargo's wheel specifications have changed over the years. The 2006 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2006 Ford E250 Super Duty Cargo
For your 2006 Ford E250 Super Duty Cargo, the critical center bore is 124.9mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 0-15mm; staying within this range maintains suspension geometry and prevents rubbing. Always use the correct lug nut: 9/16" thread with a cone seat (60-degree taper). Ball-seat or flat-seat nuts are unsafe. Re-torque after 50-100 miles. Wheels from 2003-2007 E250 models are compatible, but verify bore and offset.
Historical Fitment Data Reference
In our dataset, Ford E250 Super Duty Cargo appears from 2003 to 2007 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 124.9mm to avoid vibration.
- ✅ Stick to offset 0-15mm; offsets outside this range may cause rubbing or bearing stress.
- ✅ Re-torque lug nuts to 165 ft-lbs after 50-100 miles; use a torque wrench, not an impact gun.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Ford E250 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2006 Ford E250 Super Duty Cargo?
The 2006 Ford E250 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E250 Super Duty Cargo have the same bolt pattern as the 2006?
The Ford E250 Super Duty Cargo uses the 8x165.1 pattern from 2003 through 2007. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 124.9mm center bore important for the 2006 E250 Super Duty Cargo?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2006 Ford E250 Super Duty Cargo?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
What is the center bore of a 2006 Ford E250 Super Duty Cargo?
The factory center bore (hub bore) for the 2006 Ford E250 Super Duty Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2006 Ford E250 Super Duty Cargo?
The OEM offset for the 2006 E250 Super Duty Cargo is typically around 0-15mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset