2007 Ford E250 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ford E250 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 E250 Super Duty Cargo — Year-Specific Fitment Context
The 2007 model year is the final year of the Ford E250 Super Duty Cargo's 8x165.1 bolt pattern run (since 2003). Wheels from any 2003–2007 Ford E250 Super Duty Cargo are cross-compatible with the 2007 model.
Ford E250 Super Duty Cargo Bolt Pattern by Year
The table below shows how the E250 Super Duty Cargo's wheel specifications have changed over the years. The 2007 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 Ford E250 Super Duty Cargo
For your 2007 Ford E250 Super Duty Cargo, the 8x165.1 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 0-15mm; staying within this range avoids rubbing or suspension interference. Always use 9/16" lug nuts with the correct thread pitch (likely 9/16-18) and seat type (conical/ball seat) to match your wheels. Mismatched seats can cause lug nuts to loosen. Re-torque after 50-100 miles. Verify wheel load rating exceeds the vehicle's GVWR.
Historical Fitment Data Reference
In our dataset, Ford E250 Super Duty Cargo appears from 2003 to 2007 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a larger bore than 124.9mm to prevent vibration.
- ✅ Re-torque lug nuts to manufacturer spec (typically 140-165 ft-lbs) after 50-100 miles of driving.
- ✅ Avoid wheels with offset outside 0-15mm; negative offset may cause rubbing on suspension components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ford E250 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2007 Ford E250 Super Duty Cargo?
The 2007 Ford E250 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E250 Super Duty Cargo have the same bolt pattern as the 2007?
The Ford E250 Super Duty Cargo uses the 8x165.1 pattern from 2003 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Will wheels from another Ford fit my 2007 E250 Super Duty Cargo?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
What is the PCD for a 2007 Ford E250 Super Duty Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 E250 Super Duty Cargo, the PCD is 8x165.1.
What does 0-15mmmm offset mean for the 2007 E250 Super Duty Cargo?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 2007 Ford?
The 2007 E250 Super Duty Cargo uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset