2026 GMC HUMMER EV Pickup Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 GMC HUMMER EV Pickup is 8x165.1 (8x6.5"). It has a center bore of 124.9 mm, an offset range of 25-35, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 GMC HUMMER EV Pickup Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Center Bore (Hub Bore) | 124.9 mm |
| Offset Range (ET) | 25-35 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2026 HUMMER EV Pickup — Year-Specific Fitment Context
The 2026 model year is the final year of the GMC HUMMER EV Pickup's 8x165.1 bolt pattern run (since 2022). Wheels from any 2022–2026 GMC HUMMER EV Pickup are cross-compatible with the 2026 model.
GMC HUMMER EV Pickup Bolt Pattern by Year
Looking for all generations? View the complete GMC HUMMER EV Pickup (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the HUMMER EV Pickup's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 GMC HUMMER EV Pickup Wheel Interchange & Donor Fitment Guide (8x165.1)
The 8x165.1 bolt pattern is shared by 867 vehicles in our database (common). For safe wheel swaps on the 2026 GMC HUMMER EV Pickup, donor rims must match the 8x165.1 PCD and have a center bore of at least 124.9 mm:
DIRECT HUB MATCH Same 8x165.1 Pattern & Exact 124.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Ford E-350 | 124.9 mm (Exact) | 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) | 14x1.5 (Flat) |
| 2011 Ford E150 Passenger | 124.9 mm (Exact) | 0-15mm | 9/16 (Cone) |
| 1992 Ford F350 Crew Cab | 124.9 mm (Exact) | 0 | 9/16 18 (Cone) |
| 1992 Ford F350 Regular Cab | 124.9 mm (Exact) | 0 | 9/16 18 (Cone) |
| 1992 Ford F350 Super Cab | 124.9 mm (Exact) | 0 | 9/16 18 (Cone) |
HUB RING FITMENT Same 8x165.1 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Nissan NV1500 Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV2500 HD Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV3500 HD Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV3500 HD Passenger | 131.0 mm | 131.0mm → 124.9mm |
30 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 GMC HUMMER EV Pickup — Frequently Asked Questions
What is the bolt pattern for a 2026 GMC HUMMER EV Pickup?
The 2026 GMC HUMMER EV Pickup uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 25-35mm.
What other years of GMC HUMMER EV Pickup have the same bolt pattern as the 2026?
The GMC HUMMER EV Pickup uses the 8x165.1 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 GMC HUMMER EV Pickups use lug bolts or lug nuts?
The 2026 HUMMER EV Pickup requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2026 GMC HUMMER EV Pickup?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 25-35mm offset mean for the 2026 HUMMER EV Pickup?
An offset of 25-35mm means the wheel's mounting surface is 25-35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
What lug nut size does the 2026 GMC HUMMER EV Pickup use?
The 2026 GMC HUMMER EV Pickup uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →