2011 Ford E350 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ford E350 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2011 E350 Super Duty Cargo — Year-Specific Fitment Context
The 2011 Ford E350 Super Duty Cargo is in year 9 of 12 using the 8x165.1 pattern (2003–2014). Wheels from any 2003–2014 Ford E350 Super Duty Cargo are cross-compatible with the 2011 model.
Ford E350 Super Duty Cargo Bolt Pattern by Year
The table below shows how the E350 Super Duty Cargo's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 8x165.1 | 124.9 | 0-15mm |
| 2004 | 8x165.1 | 124.9 | 0-15mm |
| 2005 | 8x165.1 | 124.9 | 0-15mm |
| 2006 | 8x165.1 | 124.9 | 0-15mm |
| 2007 | 8x165.1 | 124.9 | 0-15mm |
| 2008 | 8x165.1 | 124.9 | 0-15mm |
| 2009 | 8x165.1 | 124.9 | 0-15mm |
| 2010 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 2011 | 8x165.1 | 124.9 | 0-15mm |
| 2012 | 8x165.1 | 124.9 | 0-15mm |
| 2013 | 8x165.1 | 124.9 | 0-15mm |
| 2014 | 8x165.1 | 124.9 | 0-15mm |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2011 Ford E350 Super Duty Cargo
For your 2011 Ford E350 Super Duty Cargo, the 8x165.1 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset should stay within 0-15mm to avoid rubbing or suspension interference. Always verify lug nut thread pitch (9/16" fine) and seat type—use conical (60-degree) or ball seat nuts as specified; incorrect seating can cause wheel loss. Re-torque after 50-100 miles. Wheels from 2003-2014 E350 models are direct fit.
Historical Fitment Data Reference
In our dataset, Ford E350 Super Duty Cargo appears from 2003 to 2014 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings with aftermarket wheels to match the 124.9mm bore; otherwise, vibrations and lug stud stress may occur.
- ✅ Stick to offset between 0 and +15mm; going outside this range can cause tire rubbing on the frame or fenders, especially with wider tires.
- ✅ Re-torque lug nuts to 165 ft-lbs after 50-100 miles; use a torque wrench and check periodically to prevent loosening.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ford E350 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2011 Ford E350 Super Duty Cargo?
The 2011 Ford E350 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E350 Super Duty Cargo have the same bolt pattern as the 2011?
The Ford E350 Super Duty Cargo uses the 8x165.1 pattern from 2003 through 2014. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another Ford fit my 2011 E350 Super Duty Cargo?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
Can I put aftermarket wheels on my 2011 Ford E350 Super Duty Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 124.9mm (using hub rings if larger).
Do 2011 Ford E350 Super Duty Cargos use lug bolts or lug nuts?
The 2011 E350 Super Duty Cargo requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2011 Ford E350 Super Duty Cargo?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset