2012 Ford E350 Super Duty Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Ford E350 Super Duty Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2012 E350 Super Duty Cargo — Year-Specific Fitment Context
The 2012 Ford E350 Super Duty Cargo is in year 10 of 12 using the 8x165.1 pattern (2003–2014). Wheels from any 2003–2014 Ford E350 Super Duty Cargo are cross-compatible with the 2012 model.
Ford E350 Super Duty Cargo Bolt Pattern by Year
The table below shows how the E350 Super Duty Cargo's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 8x165.1 | 124.9 | 0-15mm |
| 2004 | 8x165.1 | 124.9 | 0-15mm |
| 2005 | 8x165.1 | 124.9 | 0-15mm |
| 2006 | 8x165.1 | 124.9 | 0-15mm |
| 2007 | 8x165.1 | 124.9 | 0-15mm |
| 2008 | 8x165.1 | 124.9 | 0-15mm |
| 2009 | 8x165.1 | 124.9 | 0-15mm |
| 2010 | 8x165.1 | 124.9 | 0-15mm |
| 2011 | 8x165.1 | 124.9 | 0-15mm |
| ▸ 2012 | 8x165.1 | 124.9 | 0-15mm |
| 2013 | 8x165.1 | 124.9 | 0-15mm |
| 2014 | 8x165.1 | 124.9 | 0-15mm |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2012 Ford E350 Super Duty Cargo
For your 2012 Ford E350 Super Duty Cargo, the 8x165.1 bolt pattern is shared across 2003–2014 models, ensuring cross-compatibility. Critical: the center bore is 124.9mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not lugs. Offset must stay within 0-15mm; deviations risk rubbing or poor handling. Safety: use correct 9/16 lug nuts with the proper thread pitch (likely 9/16-18) and seat type—factory wheels use a cone seat; aftermarket may require ball or acorn seats. Always verify lug nut engagement and torque to spec.
Historical Fitment Data Reference
In our dataset, Ford E350 Super Duty Cargo appears from 2003 to 2014 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and thermal expansion.
- ✅ Avoid using wheels from pre-2003 Ford Super Duty models, as they may have a different bolt pattern or offset.
- ✅ Check wheel load rating; the E350 Cargo is heavy, so ensure wheels are rated for at least 3,500 lbs each.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Ford E350 Super Duty Cargo — Frequently Asked Questions
What is the bolt pattern for a 2012 Ford E350 Super Duty Cargo?
The 2012 Ford E350 Super Duty Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford E350 Super Duty Cargo have the same bolt pattern as the 2012?
The Ford E350 Super Duty Cargo uses the 8x165.1 pattern from 2003 through 2014. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2012 Ford E350 Super Duty Cargo?
Refer to your owner's manual for exact specs, but always tighten the 9/16 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2012 Ford E350 Super Duty Cargo use?
The 2012 Ford E350 Super Duty Cargo uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2012 Ford E350 Super Duty Cargos use lug bolts or lug nuts?
The 2012 E350 Super Duty Cargo requires 9/16 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2012 Ford E350 Super Duty Cargo?
The factory center bore (hub bore) for the 2012 Ford E350 Super Duty Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset