1996 Ford Econoline E150 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Ford Econoline E150 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2-20 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
1996 Econoline E150 Cargo — Year-Specific Fitment Context
The 1996 Ford Econoline E150 Cargo is in year 5 of 11 using the 5x139.7 pattern (1992–2002). Wheels from any 1992–2002 Ford Econoline E150 Cargo are cross-compatible with the 1996 model.
Ford Econoline E150 Cargo Bolt Pattern by Year
The table below shows how the Econoline E150 Cargo's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0-15mm |
| 1993 | 5x139.7 | 87.1 | 0-15mm |
| 1994 | 5x139.7 | 87.1 | 0-15mm |
| 1995 | 5x139.7 | 87.1 | 0-15mm |
| ▸ 1996 | 5x139.7 | 87.1 | 0-15mm |
| 1997 | 5x139.7 | 87.1 | 0-15mm |
| 1998 | 5x139.7 | 87.1 | 0-15mm |
| 1999 | 5x139.7 | 87.1 | 0-15mm |
| 2000 | 5x139.7 | 87.1 | 0-15mm |
| 2001 | 5x139.7 | 87.1 | 0-15mm |
| 2002 | 5x139.7 | 87.1 | 0-15mm |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 1996 Ford Econoline E150 Cargo
For your 1996 Ford Econoline E150 Cargo, the 5x139.7 bolt pattern is shared with 1992–2002 models, ensuring cross-compatibility. The 87.1mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and load stress. Offset must stay within 0–15mm; deviations risk rubbing or bearing wear. Always use 1/2-20 lug nuts with proper conical (60-degree) or ball seats—mismatched seats cause loosening. Re-torque after 50–100 miles. Avoid wheels with insufficient load rating for your van's GVWR.
Historical Fitment Data Reference
In our dataset, Ford Econoline E150 Cargo appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140–150 ft-lbs after 50–100 miles; check periodically.
- ✅ Ensure aftermarket wheels have a center bore ≥87.1mm; use hub-centric rings if larger.
- ✅ Verify offset with a test fit: 0mm offset sits flush, 15mm moves inward; avoid exceeding these limits.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Ford Econoline E150 Cargo — Frequently Asked Questions
What is the bolt pattern for a 1996 Ford Econoline E150 Cargo?
The 1996 Ford Econoline E150 Cargo uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 0-15mmmm.
What other years of Ford Econoline E150 Cargo have the same bolt pattern as the 1996?
The Ford Econoline E150 Cargo uses the 5x139.7 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1996 Ford?
The 1996 Econoline E150 Cargo uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 1996 Ford Econoline E150 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 Econoline E150 Cargo, the PCD is 5x139.7.
What lug nut size does the 1996 Ford Econoline E150 Cargo use?
The 1996 Ford Econoline E150 Cargo uses 1/2-20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 1996 Ford Econoline E150 Cargo?
The factory center bore (hub bore) for the 1996 Ford Econoline E150 Cargo is 87.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset