2002 Ford Econoline E150 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford Econoline E150 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2-20 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2002 Econoline E150 Cargo — Year-Specific Fitment Context
The 2002 model year is the final year of the Ford Econoline E150 Cargo's 5x139.7 bolt pattern run (since 1992). Wheels from any 1992–2002 Ford Econoline E150 Cargo are cross-compatible with the 2002 model.
Ford Econoline E150 Cargo Bolt Pattern by Year
The table below shows how the Econoline E150 Cargo's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0-15mm |
| 1993 | 5x139.7 | 87.1 | 0-15mm |
| 1994 | 5x139.7 | 87.1 | 0-15mm |
| 1995 | 5x139.7 | 87.1 | 0-15mm |
| 1996 | 5x139.7 | 87.1 | 0-15mm |
| 1997 | 5x139.7 | 87.1 | 0-15mm |
| 1998 | 5x139.7 | 87.1 | 0-15mm |
| 1999 | 5x139.7 | 87.1 | 0-15mm |
| 2000 | 5x139.7 | 87.1 | 0-15mm |
| 2001 | 5x139.7 | 87.1 | 0-15mm |
| ▸ 2002 | 5x139.7 | 87.1 | 0-15mm |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2002 Ford Econoline E150 Cargo
For your 2002 Ford Econoline E150 Cargo, the 5x139.7 bolt pattern is shared with 1992–2002 models. The 87.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure load support. Offset must stay within 0-15mm; deviations risk rubbing or bearing stress. Use 1/2-20 lug nuts with proper seat type—factory uses cone seat; aftermarket may require ball seat. Always verify lug nut engagement and torque to spec. Failure to match these specs compromises safety and handling.
Historical Fitment Data Reference
In our dataset, Ford Econoline E150 Cargo appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid wheels with offset beyond 0-15mm; even 5mm deviation can cause clearance issues.
- ✅ Inspect hub bore diameter; aftermarket wheels often have larger bores requiring centering rings.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Ford Econoline E150 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford Econoline E150 Cargo?
The 2002 Ford Econoline E150 Cargo uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 0-15mmmm.
What other years of Ford Econoline E150 Cargo have the same bolt pattern as the 2002?
The Ford Econoline E150 Cargo uses the 5x139.7 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2002 Ford Econoline E150 Cargo?
Refer to your owner's manual for exact specs, but always tighten the 1/2-20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2002 Ford Econoline E150 Cargos use lug bolts or lug nuts?
The 2002 Econoline E150 Cargo requires 1/2-20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2002 Ford Econoline E150 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 87.1mm (using hub rings if larger).
Can I use spacers on my 2002 Ford Econoline E150 Cargo?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 87.1mm center bore. Also verify that you have enough thread engagement for your 1/2-20 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset