2000 Ford Econoline E150 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Ford Econoline E150 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2-20 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2000 Econoline E150 Passenger — Year-Specific Fitment Context
The 2000 Ford Econoline E150 Passenger is in year 2 of 4 using the 5x139.7 pattern (1999–2002). Wheels from any 1999–2002 Ford Econoline E150 Passenger are cross-compatible with the 2000 model.
Ford Econoline E150 Passenger Bolt Pattern by Year
The table below shows how the Econoline E150 Passenger's wheel specifications have changed over the years. The 2000 model year is highlighted.
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2000 Ford Econoline E150 Passenger
For your 2000 Ford Econoline E150 Passenger, the 5x139.7 bolt pattern is shared with 1999–2002 models. The center bore is 87.1mm; aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibrations and ensure proper load distribution. Offset must stay within 0-15mm to avoid rubbing or clearance issues. Use 1/2-20 lug nuts with the correct seat type (typically conical/60-degree for aftermarket wheels; verify factory wheel seat). Always torque to manufacturer specs and re-torque after 50-100 miles. Mismatched lug nuts can cause wheel loss.
Historical Fitment Data Reference
In our dataset, Ford Econoline E150 Passenger appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Aftermarket wheels may require hub-centric rings (87.1mm ID to wheel bore) to prevent vibrations.
- ✅ Verify offset carefully: 0-15mm range; going outside may cause rubbing on suspension or body.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Ford Econoline E150 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2000 Ford Econoline E150 Passenger?
The 2000 Ford Econoline E150 Passenger uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 0-15mmmm.
What other years of Ford Econoline E150 Passenger have the same bolt pattern as the 2000?
The Ford Econoline E150 Passenger uses the 5x139.7 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Do 2000 Ford Econoline E150 Passengers use lug bolts or lug nuts?
The 2000 Econoline E150 Passenger requires 1/2-20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2000 Ford Econoline E150 Passenger use?
The 2000 Ford Econoline E150 Passenger uses 1/2-20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2000 Ford Econoline E150 Passenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Econoline E150 Passenger, the PCD is 5x139.7.
What is the center bore of a 2000 Ford Econoline E150 Passenger?
The factory center bore (hub bore) for the 2000 Ford Econoline E150 Passenger is 87.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset