1993 Ford Econoline E350 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Ford Econoline E350 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0-15mm |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1993 Econoline E350 Cargo — Year-Specific Fitment Context
The 1993 Ford Econoline E350 Cargo is in year 2 of 8 using the 8x165.1 pattern (1992–1999). Wheels from any 1992–1999 Ford Econoline E350 Cargo are cross-compatible with the 1993 model.
Ford Econoline E350 Cargo Bolt Pattern by Year
The table below shows how the Econoline E350 Cargo's wheel specifications have changed over the years. The 1993 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1993 Ford Econoline E350 Cargo
For your 1993 Ford Econoline E350 Cargo, the 8x165.1 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 130.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 0-15mm; staying within this range avoids rubbing on suspension or body. Always use 9/16" lug nuts with the correct thread pitch (likely 9/16-18) and verify the seat type—most Ford wheels use a conical (60-degree) seat. Never use ball-seat lug nuts on conical wheels. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Ford Econoline E350 Cargo appears from 1992 to 1999 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-165 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel center bore; if larger than 124.9mm, use hub-centric rings to avoid vibrations.
- ✅ Check that aftermarket wheels have sufficient clearance for the front brake calipers and rear dual wheels (if applicable).
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Ford Econoline E350 Cargo — Frequently Asked Questions
What is the bolt pattern for a 1993 Ford Econoline E350 Cargo?
The 1993 Ford Econoline E350 Cargo uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0-15mmmm.
What other years of Ford Econoline E350 Cargo have the same bolt pattern as the 1993?
The Ford Econoline E350 Cargo uses the 8x165.1 pattern from 1992 through 1999. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What does 0-15mmmm offset mean for the 1993 Econoline E350 Cargo?
An offset of 0-15mmmm means the wheel's mounting surface is 0-15mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What lug nut size does the 1993 Ford Econoline E350 Cargo use?
The 1993 Ford Econoline E350 Cargo uses 9/16 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 1993 Ford Econoline E350 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Econoline E350 Cargo, the PCD is 8x165.1.
What is the center bore of a 1993 Ford Econoline E350 Cargo?
The factory center bore (hub bore) for the 1993 Ford Econoline E350 Cargo is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset