2016 Ford Expedition EL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Ford Expedition EL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 Expedition EL — Year-Specific Fitment Context
The 2016 Ford Expedition EL is in year 10 of 11 using the 6x135 pattern (2007–2017). Wheels from any 2007–2017 Ford Expedition EL are cross-compatible with the 2016 model.
Ford Expedition EL Bolt Pattern by Year
The table below shows how the Expedition EL's wheel specifications have changed over the years. The 2016 model year is highlighted.
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2016 Ford Expedition EL
For your 2016 Ford Expedition EL, the 6x135 bolt pattern is shared with 2007–2017 models, ensuring cross-compatibility. Critical fitment factors: center bore must be 87.1mm or larger; if larger, use hub-centric rings to prevent vibration and ensure load support. Offset should stay near 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. Aftermarket wheels often require hub rings and proper lug nuts for safety.
Historical Fitment Data Reference
In our dataset, Ford Expedition EL appears from 2007 to 2017 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 39mm (too aggressive) or above 49mm (too tucked) to prevent brake or suspension contact.
- ✅ Check that aftermarket wheels have sufficient clearance for the large brake calipers on the Expedition EL.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Ford Expedition EL — Frequently Asked Questions
What is the bolt pattern for a 2016 Ford Expedition EL?
The 2016 Ford Expedition EL uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford Expedition EL have the same bolt pattern as the 2016?
The Ford Expedition EL uses the 6x135 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Will wheels from another Ford fit my 2016 Expedition EL?
Only if they share the exact same 6x135 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
Can I use spacers on my 2016 Ford Expedition EL?
Yes, but ensure the wheel spacers match the 6x135 bolt pattern and 87.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Do 2016 Ford Expedition ELs use lug bolts or lug nuts?
The 2016 Expedition EL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2016 Ford?
The 2016 Expedition EL uses a 6x135 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset