2010 Ford Expedition EL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford Expedition EL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x2.0 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2010 Expedition EL — Year-Specific Fitment Context
The 2010 Ford Expedition EL is in year 4 of 11 using the 6x135 pattern (2007–2017). Wheels from any 2007–2017 Ford Expedition EL are cross-compatible with the 2010 model.
Ford Expedition EL Bolt Pattern by Year
The table below shows how the Expedition EL's wheel specifications have changed over the years. The 2010 model year is highlighted.
Fitment Notes
The 2010 Ford Expedition EL has a bolt pattern of 6x135.
This means it is a 6 lug pattern with a circle diameter of 135mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Expedition EL appears from 2007 to 2017 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
2010 Ford Expedition EL — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford Expedition EL?
The 2010 Ford Expedition EL uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford Expedition EL have the same bolt pattern as the 2010?
The Ford Expedition EL uses the 6x135 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2010 Ford Expedition EL?
Absolutely. Just ensure the aftermarket wheels have a 6x135 bolt pattern, an offset near 44mm, and a center bore of at least 87.1mm (using hub rings if larger).
What is the PCD for a 2010 Ford Expedition EL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Expedition EL, the PCD is 6x135.
How do I measure the bolt pattern on my 2010 Ford?
The 2010 Expedition EL uses a 6x135 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2010 Ford Expedition EL use?
The 2010 Ford Expedition EL uses 14x2.0 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Expedition EL is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2017 (11 model years).
- Observed bolt-pattern variants: 1 (6x135).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2010 Ford Expedition EL, please report it via our About page contact so we can verify and update this record.