2024 Ford F-550 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Ford F-550 is 8x170. It has a center bore of 125.2 mm, an offset range of 40-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 165 ft-lbs (224 Nm).
2024 Ford F-550 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.2 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 165 ft-lbs (224 Nm) |
2024 F-550 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Ford F-550's 8x170 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Ford F-550 are cross-compatible with the 2024 model.
Ford F-550 Bolt Pattern by Year
Looking for all generations? View the complete Ford F-550 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the F-550's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Ford F-550 Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 197 vehicles in our database (uncommon). For safe wheel swaps on the 2024 Ford F-550, donor rims must match the 8x170 PCD and have a center bore of at least 125.2 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 Ford F450 Super Duty Crew Cab | 125.1 mm (Exact) | 0 | 14x1.5 (Cone) |
| 2025 Ford E-450 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Ford F-250 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-350 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-450 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-600 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2014 Ford F250 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2017 Ford F350 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2001 Ford F350 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 165 ft-lbs (224 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Ford F-550 — Frequently Asked Questions
What is the bolt pattern for a 2024 Ford F-550?
The 2024 Ford F-550 uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.2mm and the offset is 40-45mm.
What other years of Ford F-550 have the same bolt pattern as the 2024?
The Ford F-550 uses the 8x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Why is matching the 125.2mm center bore important for the 2024 F-550?
The 125.2mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2024 Ford F-550 use?
The 2024 Ford F-550 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2024 Ford F-550?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 40-45mm, and a center bore of at least 125.2mm (using hub rings if larger).
What does 40-45mm offset mean for the 2024 F-550?
An offset of 40-45mm means the wheel's mounting surface is 40-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →