1999 Ford F150 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Ford F150 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x135 |
|---|---|
| Lug Nut / Bolt Size | 12x1.75 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 14 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1999 F150 Regular Cab — Year-Specific Fitment Context
The 1999 Ford F150 Regular Cab is in year 3 of 7 using the 5x135 pattern (1997–2003). Wheels from any 1997–2003 Ford F150 Regular Cab are cross-compatible with the 1999 model. Across its full production run (1992–2024), the F150 Regular Cab has also used: 5x139.7, 6x135.
Ford F150 Regular Cab Bolt Pattern by Year
The table below shows how the F150 Regular Cab's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0 |
| 1993 | 5x139.7 | 87.1 | 0 |
| 1994 | 5x139.7 | 87.1 | 0 |
| 1995 | 5x139.7 | 87.1 | 0 |
| 1996 | 5x139.7 | 87.1 | 0 |
| 1997 | 5x135 | 87.1 | 14 |
| 1998 | 5x135 | 87.1 | 14 |
| ▸ 1999 | 5x135 | 87.1 | 14 |
| 2000 | 5x135 | 87.1 | 14 |
| 2001 | 5x135 | 87.1 | 14 |
| 2002 | 5x135 | 87.1 | 14 |
| 2003 | 5x135 | 87.1 | 14 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 44 |
| 2009 | 6x135 | 87.1 | 44 |
| 2010 | 6x135 | 87.1 | 44 |
| 2011 | 6x135 | 87.1 | 44 |
| 2012 | 6x135 | 87.1 | 44 |
| 2013 | 6x135 | 87.1 | 44 |
| 2014 | 6x135 | 87.1 | 44 |
| 2015 | 6x135 | 87.1 | 44 |
| 2016 | 6x135 | 87.1 | 44 |
| 2017 | 6x135 | 87.1 | 44 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
5x135 Pattern Context
This bolt pattern appears on 31 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x135:
Expert Buying Guide for 1999 Ford F150 Regular Cab
For your 1999 Ford F150 Regular Cab, the bolt pattern is 5x135mm with a center bore of 87.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 87.1mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock offset is 14mm, but a range of 0-30mm is acceptable depending on tire width and suspension. Avoid offsets that cause rubbing or excessive bearing load. Always use lug nuts with the correct thread pitch (12x1.75) and seat type (conical/60-degree taper) to prevent wheel loosening. Never use ball-seat lug nuts on conical-seat wheels. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford F150 Regular Cab appears from 1992 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (5x135, 5x139.7, 6x135).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 44.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-140 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match the 87.1mm hub diameter.
- ✅ Avoid wheels with offset below 0mm or above 30mm to prevent rubbing on suspension or body components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Ford F150 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1999 Ford F150 Regular Cab?
The 1999 Ford F150 Regular Cab uses a 5x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 14mm.
What other years of Ford F150 Regular Cab have the same bolt pattern as the 1999?
The Ford F150 Regular Cab uses the 5x135 pattern from 1997 through 2003. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1999 Ford F150 Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x135 bolt pattern, an offset near 14mm, and a center bore of at least 87.1mm (using hub rings if larger).
Why is matching the 87.1mm center bore important for the 1999 F150 Regular Cab?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1999 Ford F150 Regular Cab?
The OEM offset for the 1999 F150 Regular Cab is typically around 14mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 1999 Ford F150 Regular Cab?
Yes, but ensure the wheel spacers match the 5x135 bolt pattern and 87.1mm center bore. Also verify that you have enough thread engagement for your 12x1.75 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset