2007 Ford F150 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Ford F150 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x2.0 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2007 F150 Regular Cab — Year-Specific Fitment Context
The 2007 Ford F150 Regular Cab is in year 4 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford F150 Regular Cab are cross-compatible with the 2007 model. Across its full production run (1992–2024), the F150 Regular Cab has also used: 5x135, 5x139.7.
Ford F150 Regular Cab Bolt Pattern by Year
The table below shows how the F150 Regular Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0 |
| 1993 | 5x139.7 | 87.1 | 0 |
| 1994 | 5x139.7 | 87.1 | 0 |
| 1995 | 5x139.7 | 87.1 | 0 |
| 1996 | 5x139.7 | 87.1 | 0 |
| 1997 | 5x135 | 87.1 | 14 |
| 1998 | 5x135 | 87.1 | 14 |
| 1999 | 5x135 | 87.1 | 14 |
| 2000 | 5x135 | 87.1 | 14 |
| 2001 | 5x135 | 87.1 | 14 |
| 2002 | 5x135 | 87.1 | 14 |
| 2003 | 5x135 | 87.1 | 14 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| ▸ 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 44 |
| 2009 | 6x135 | 87.1 | 44 |
| 2010 | 6x135 | 87.1 | 44 |
| 2011 | 6x135 | 87.1 | 44 |
| 2012 | 6x135 | 87.1 | 44 |
| 2013 | 6x135 | 87.1 | 44 |
| 2014 | 6x135 | 87.1 | 44 |
| 2015 | 6x135 | 87.1 | 44 |
| 2016 | 6x135 | 87.1 | 44 |
| 2017 | 6x135 | 87.1 | 44 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2007 Ford F150 Regular Cab
For your 2007 Ford F150 Regular Cab, the 6x135 bolt pattern and 87.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 87.1mm or larger); always use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Use only 14x2.0 lug nuts with the correct seat type—factory wheels use a cone seat. Never mix seat types; improper seating can lead to wheel loss. Always torque to manufacturer specs and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford F150 Regular Cab appears from 1992 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (5x135, 5x139.7, 6x135).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 44.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lbs after 50-100 miles of driving.
- ✅ Verify aftermarket wheels have a center bore of at least 87.1mm; use hub-centric rings if larger.
- ✅ Check offset carefully: staying within 39-49mm ensures proper clearance for brakes and suspension.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Ford F150 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Ford F150 Regular Cab?
The 2007 Ford F150 Regular Cab uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford F150 Regular Cab have the same bolt pattern as the 2007?
The Ford F150 Regular Cab uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Ford F150 Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x135 bolt pattern, an offset near 44mm, and a center bore of at least 87.1mm (using hub rings if larger).
What is the factory wheel offset for a 2007 Ford F150 Regular Cab?
The OEM offset for the 2007 F150 Regular Cab is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 87.1mm center bore important for the 2007 F150 Regular Cab?
The 87.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2007 Ford F150 Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x2.0 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset