2010 Ford F150 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford F150 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x2.0 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2010 F150 Regular Cab — Year-Specific Fitment Context
The 2010 Ford F150 Regular Cab is in year 7 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford F150 Regular Cab are cross-compatible with the 2010 model. Across its full production run (1992–2024), the F150 Regular Cab has also used: 5x135, 5x139.7.
Ford F150 Regular Cab Bolt Pattern by Year
The table below shows how the F150 Regular Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0 |
| 1993 | 5x139.7 | 87.1 | 0 |
| 1994 | 5x139.7 | 87.1 | 0 |
| 1995 | 5x139.7 | 87.1 | 0 |
| 1996 | 5x139.7 | 87.1 | 0 |
| 1997 | 5x135 | 87.1 | 14 |
| 1998 | 5x135 | 87.1 | 14 |
| 1999 | 5x135 | 87.1 | 14 |
| 2000 | 5x135 | 87.1 | 14 |
| 2001 | 5x135 | 87.1 | 14 |
| 2002 | 5x135 | 87.1 | 14 |
| 2003 | 5x135 | 87.1 | 14 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 44 |
| 2009 | 6x135 | 87.1 | 44 |
| ▸ 2010 | 6x135 | 87.1 | 44 |
| 2011 | 6x135 | 87.1 | 44 |
| 2012 | 6x135 | 87.1 | 44 |
| 2013 | 6x135 | 87.1 | 44 |
| 2014 | 6x135 | 87.1 | 44 |
| 2015 | 6x135 | 87.1 | 44 |
| 2016 | 6x135 | 87.1 | 44 |
| 2017 | 6x135 | 87.1 | 44 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2010 Ford F150 Regular Cab
For your 2010 Ford F150 Regular Cab, the bolt pattern is 6x135 with a center bore of 87.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 87.1mm or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; staying within ±6mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x2.0) and seat type (cone seat for most aftermarket wheels). Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford F150 Regular Cab appears from 1992 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (5x135, 5x139.7, 6x135).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 44.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings; verify ring thickness matches the hub diameter.
- ✅ Avoid wheels with offset below 38mm or above 50mm to prevent rubbing on the fender or suspension components.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Ford F150 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford F150 Regular Cab?
The 2010 Ford F150 Regular Cab uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford F150 Regular Cab have the same bolt pattern as the 2010?
The Ford F150 Regular Cab uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Ford F150 Regular Cab?
The OEM offset for the 2010 F150 Regular Cab is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2010 Ford F150 Regular Cab use?
The 2010 Ford F150 Regular Cab uses 14x2.0 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Ford fit my 2010 F150 Regular Cab?
Only if they share the exact same 6x135 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
Do 2010 Ford F150 Regular Cabs use lug bolts or lug nuts?
The 2010 F150 Regular Cab requires 14x2.0 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset