2017 Ford F150 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Ford F150 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 F150 Regular Cab — Year-Specific Fitment Context
The 2017 Ford F150 Regular Cab is in year 14 of 21 using the 6x135 pattern (2004–2024). Wheels from any 2004–2024 Ford F150 Regular Cab are cross-compatible with the 2017 model. Across its full production run (1992–2024), the F150 Regular Cab has also used: 5x135, 5x139.7.
Ford F150 Regular Cab Bolt Pattern by Year
The table below shows how the F150 Regular Cab's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x139.7 | 87.1 | 0 |
| 1993 | 5x139.7 | 87.1 | 0 |
| 1994 | 5x139.7 | 87.1 | 0 |
| 1995 | 5x139.7 | 87.1 | 0 |
| 1996 | 5x139.7 | 87.1 | 0 |
| 1997 | 5x135 | 87.1 | 14 |
| 1998 | 5x135 | 87.1 | 14 |
| 1999 | 5x135 | 87.1 | 14 |
| 2000 | 5x135 | 87.1 | 14 |
| 2001 | 5x135 | 87.1 | 14 |
| 2002 | 5x135 | 87.1 | 14 |
| 2003 | 5x135 | 87.1 | 14 |
| 2004 | 6x135 | 87.1 | 44 |
| 2005 | 6x135 | 87.1 | 44 |
| 2006 | 6x135 | 87.1 | 44 |
| 2007 | 6x135 | 87.1 | 44 |
| 2008 | 6x135 | 87.1 | 44 |
| 2009 | 6x135 | 87.1 | 44 |
| 2010 | 6x135 | 87.1 | 44 |
| 2011 | 6x135 | 87.1 | 44 |
| 2012 | 6x135 | 87.1 | 44 |
| 2013 | 6x135 | 87.1 | 44 |
| 2014 | 6x135 | 87.1 | 44 |
| 2015 | 6x135 | 87.1 | 44 |
| 2016 | 6x135 | 87.1 | 44 |
| ▸ 2017 | 6x135 | 87.1 | 44 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
6x135 Pattern Context
This bolt pattern appears on 147 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Expert Buying Guide for 2017 Ford F150 Regular Cab
For the 2017 Ford F150 Regular Cab, the 6x135 bolt pattern is shared with 2004–2024 models, but critical dimensions differ. The center bore is 87.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 44mm. Going too low (e.g., 0mm) can cause rubbing and bearing stress; too high (e.g., 60mm) may contact suspension. Always use the correct lug nuts: 14x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Ford F150 Regular Cab appears from 1992 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (5x135, 5x139.7, 6x135).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 4
- Observed total offset span across years: 44.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 150 ft-lb after 50–100 miles of driving, as wheel settlement can cause loosening.
- ✅ Avoid wheels with offset below 30mm or above 55mm to prevent rubbing on brake calipers or suspension components.
- ✅ If using aftermarket wheels, verify that the wheel's hub bore is at least 87.1mm; use hub-centric rings to fill any gap.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Ford F150 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2017 Ford F150 Regular Cab?
The 2017 Ford F150 Regular Cab uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is 44mm.
What other years of Ford F150 Regular Cab have the same bolt pattern as the 2017?
The Ford F150 Regular Cab uses the 6x135 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Do 2017 Ford F150 Regular Cabs use lug bolts or lug nuts?
The 2017 F150 Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2017 Ford F150 Regular Cab?
The OEM offset for the 2017 F150 Regular Cab is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2017 Ford F150 Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 F150 Regular Cab, the PCD is 6x135.
Can I use spacers on my 2017 Ford F150 Regular Cab?
Yes, but ensure the wheel spacers match the 6x135 bolt pattern and 87.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset