2012 Ford F350 Super Duty Crew Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2012 Ford F350 Super Duty Crew Cab is 8x170. It has a center bore of 125.1 mm, an offset range of 40, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2012 Ford F350 Super Duty Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2012 F350 Super Duty Crew Cab — Year-Specific Fitment Context
The 2012 Ford F350 Super Duty Crew Cab is in year 14 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Crew Cab are cross-compatible with the 2012 model.
Ford F350 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Crew Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 125.1 | 40 |
| 2000 | 8x170 | 125.1 | 40 |
| 2001 | 8x170 | 125.1 | 40 |
| 2002 | 8x170 | 125.1 | 40 |
| 2003 | 8x170 | 125.1 | 40 |
| 2004 | 8x170 | 125.1 | 40 |
| 2005 | 8x170 | 125.1 | 40 |
| 2006 | 8x170 | 125.1 | 40 |
| 2007 | 8x170 | 125.1 | 40 |
| 2008 | 8x170 | 125.1 | 40 |
| 2009 | 8x170 | 125.1 | 40 |
| 2010 | 8x170 | 125.1 | 40 |
| 2011 | 8x170 | 125.1 | 40 |
| ▸ 2012 | 8x170 | 125.1 | 40 |
| 2013 | 8x170 | 125.1 | 40 |
| 2014 | 8x170 | 125.1 | 40 |
| 2015 | 8x170 | 125.1 | 40 |
| 2016 | 8x170 | 125.1 | 40 |
| 2017 | 8x170 | 125.1 | 40 |
| 2018 | 8x170 | 125.1 | 40 |
| 2019 | 8x170 | 125.1 | 40 |
| 2020 | 8x170 | 125.1 | 40 |
| 2021 | 8x170 | 125.1 | 40 |
| 2022 | 8x170 | 125.1 | 40 |
| 2024 | 8x170 | 125.1 | 40 |
2012 Ford F350 Super Duty Crew Cab Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 189 vehicles in our database (uncommon). For safe wheel swaps on the 2012 Ford F350 Super Duty Crew Cab, donor rims must match the 8x170 PCD and have a center bore of at least 125.1 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2012 Ford F350 Super Duty Regular Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2008 Ford F450 Super Duty Crew Cab | 125.1 mm (Exact) | 0 | 14x1.5 (Cone) |
| 2024 Ford Motorhome Chassis | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2024 Ford Commercial Chassis | 125.2 mm (Exact) | 40-55 | 14x1.5 (Flat) |
| 2024 Ford E-450 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.1mm |
40 |
| 1999 Ford F250 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.1mm |
40 |
| 2014 Ford F250 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.1mm |
40 |
Expert Buying Guide for 2012 Ford F350 Super Duty Crew Cab
For your 2012 Ford F350 Super Duty Crew Cab, the 8x170 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The factory offset is 40mm; deviations affect scrub radius and clearance. Stay within ±10mm to avoid rubbing or bearing stress. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat (factory uses cone seat). Mismatched seats can cause wheel loosening. Verify wheel load rating exceeds your truck's GVWR.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 165 ft-lbs (spec) to account for settling.
- ✅ Avoid wheels with offset below 30mm on lifted trucks; they may contact brake calipers or suspension.
- ✅ Check wheel backspacing: factory is ~5.5 inches; aftermarket wheels with less backspacing can cause tire rub on fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2012 Ford F350 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Ford F350 Super Duty Crew Cab?
The 2012 Ford F350 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.1mm and the offset is 40mm.
What other years of Ford F350 Super Duty Crew Cab have the same bolt pattern as the 2012?
The Ford F350 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What lug nut size does the 2012 Ford F350 Super Duty Crew Cab use?
The 2012 Ford F350 Super Duty Crew Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2012 Ford F350 Super Duty Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2012 Ford F350 Super Duty Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 F350 Super Duty Crew Cab, the PCD is 8x170.
Will wheels from another Ford fit my 2012 F350 Super Duty Crew Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 125.1mm.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →