2011 Ford F350 Super Duty Crew Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2011 Ford F350 Super Duty Crew Cab is 8x170. It has a center bore of 125.1 mm, an offset range of 40, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2011 Ford F350 Super Duty Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2011 F350 Super Duty Crew Cab — Year-Specific Fitment Context
The 2011 Ford F350 Super Duty Crew Cab is in year 13 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Crew Cab are cross-compatible with the 2011 model.
Ford F350 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Crew Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 125.1 | 40 |
| 2000 | 8x170 | 125.1 | 40 |
| 2001 | 8x170 | 125.1 | 40 |
| 2002 | 8x170 | 125.1 | 40 |
| 2003 | 8x170 | 125.1 | 40 |
| 2004 | 8x170 | 125.1 | 40 |
| 2005 | 8x170 | 125.1 | 40 |
| 2006 | 8x170 | 125.1 | 40 |
| 2007 | 8x170 | 125.1 | 40 |
| 2008 | 8x170 | 125.1 | 40 |
| 2009 | 8x170 | 125.1 | 40 |
| 2010 | 8x170 | 125.1 | 40 |
| ▸ 2011 | 8x170 | 125.1 | 40 |
| 2012 | 8x170 | 125.1 | 40 |
| 2013 | 8x170 | 125.1 | 40 |
| 2014 | 8x170 | 125.1 | 40 |
| 2015 | 8x170 | 125.1 | 40 |
| 2016 | 8x170 | 125.1 | 40 |
| 2017 | 8x170 | 125.1 | 40 |
| 2018 | 8x170 | 125.1 | 40 |
| 2019 | 8x170 | 125.1 | 40 |
| 2020 | 8x170 | 125.1 | 40 |
| 2021 | 8x170 | 125.1 | 40 |
| 2022 | 8x170 | 125.1 | 40 |
| 2024 | 8x170 | 125.1 | 40 |
2011 Ford F350 Super Duty Crew Cab Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 189 vehicles in our database (uncommon). For safe wheel swaps on the 2011 Ford F350 Super Duty Crew Cab, donor rims must match the 8x170 PCD and have a center bore of at least 125.1 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2004 Ford F250 Super Duty Regular Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F250 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Regular Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2008 Ford F450 Super Duty Crew Cab | 125.1 mm (Exact) | 0 | 14x1.5 (Cone) |
| 2024 Ford Motorhome Chassis | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.1mm |
40 |
Expert Buying Guide for 2011 Ford F350 Super Duty Crew Cab
When selecting wheels for your 2011 Ford F350 Super Duty Crew Cab, the 8x170 bolt pattern is shared across 1999–2024 models, ensuring broad compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (14x1.5) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50–100 miles and avoid mixing wheel types.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 124.9mm center bore; otherwise, vibrations may occur.
- ✅ Avoid wheels with offset below 30mm or above 50mm to prevent rubbing on brake calipers or suspension components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2011 Ford F350 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Ford F350 Super Duty Crew Cab?
The 2011 Ford F350 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.1mm and the offset is 40mm.
What other years of Ford F350 Super Duty Crew Cab have the same bolt pattern as the 2011?
The Ford F350 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2011 Ford?
The 2011 F350 Super Duty Crew Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2011 Ford F350 Super Duty Crew Cab?
The OEM offset for the 2011 F350 Super Duty Crew Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2011 Ford F350 Super Duty Crew Cab use?
The 2011 Ford F350 Super Duty Crew Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2011 Ford F350 Super Duty Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 F350 Super Duty Crew Cab, the PCD is 8x170.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →