2008 Ford F350 Super Duty Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford F350 Super Duty Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2008 F350 Super Duty Crew Cab — Year-Specific Fitment Context
The 2008 Ford F350 Super Duty Crew Cab is in year 10 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F350 Super Duty Crew Cab are cross-compatible with the 2008 model.
Ford F350 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F350 Super Duty Crew Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| ▸ 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2008 Ford F350 Super Duty Crew Cab
For your 2008 Ford F350 Super Duty Crew Cab, the 8x170 bolt pattern is shared with 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 130.1mm), requiring hub-centric rings to prevent vibration and lug nut stress. Offset is sensitive; stock is around 40mm. Deviating more than ±10mm may cause rubbing or clearance issues with brakes/suspension. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to avoid loosening. Never mix seat types. Re-torque after 50–100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Ford F350 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 124.9mm without hub-centric rings; vibration and stud failure may occur.
- ✅ Check offset carefully: stock is 40mm. Going too low (e.g., 0mm) can cause tire rub on fenders; too high (e.g., 50mm) may contact suspension components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford F350 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford F350 Super Duty Crew Cab?
The 2008 Ford F350 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F350 Super Duty Crew Cab have the same bolt pattern as the 2008?
The Ford F350 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Ford F350 Super Duty Crew Cab?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2008 Ford F350 Super Duty Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 40mm, and a center bore of at least 124.9mm (using hub rings if larger).
Do 2008 Ford F350 Super Duty Crew Cabs use lug bolts or lug nuts?
The 2008 F350 Super Duty Crew Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2008 Ford?
The 2008 F350 Super Duty Crew Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset