2015 Ford F250 Super Duty Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Ford F250 Super Duty Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2015 F250 Super Duty Regular Cab — Year-Specific Fitment Context
The 2015 Ford F250 Super Duty Regular Cab is in year 17 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Regular Cab are cross-compatible with the 2015 model.
Ford F250 Super Duty Regular Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Regular Cab's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| ▸ 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2015 Ford F250 Super Duty Regular Cab
For your 2015 Ford F250 Super Duty Regular Cab, the 8x170 bolt pattern is shared with 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; stock is around 40mm. Sticking close to this range maintains proper scrub radius and clearance. A safety warning: use only 14x1.5 lug nuts with the correct seat (cone or ball) matching your wheel. Mismatched seats can cause loosening or wheel failure. Always torque to spec and re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Regular Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles of driving to account for settling.
- ✅ Avoid wheels with offset beyond +30mm to +50mm to prevent rubbing or bearing stress.
- ✅ Verify wheel bore diameter; if larger than 124.9mm, install hub-centric rings to center the wheel.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Ford F250 Super Duty Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2015 Ford F250 Super Duty Regular Cab?
The 2015 Ford F250 Super Duty Regular Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F250 Super Duty Regular Cab have the same bolt pattern as the 2015?
The Ford F250 Super Duty Regular Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What lug nut size does the 2015 Ford F250 Super Duty Regular Cab use?
The 2015 Ford F250 Super Duty Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2015 Ford F250 Super Duty Regular Cab?
The OEM offset for the 2015 F250 Super Duty Regular Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ford fit my 2015 F250 Super Duty Regular Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
How do I measure the bolt pattern on my 2015 Ford?
The 2015 F250 Super Duty Regular Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset