2002 Ford F250 Super Duty Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford F250 Super Duty Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2002 F250 Super Duty Regular Cab — Year-Specific Fitment Context
The 2002 Ford F250 Super Duty Regular Cab is in year 4 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Regular Cab are cross-compatible with the 2002 model.
Ford F250 Super Duty Regular Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Regular Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| ▸ 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2002 Ford F250 Super Duty Regular Cab
For your 2002 Ford F250 Super Duty Regular Cab, the 8x170 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is around 40mm. Going too low (negative offset) can cause tire rub on suspension or fenders, while too high may contact brake calipers. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball seat nuts as specified. Never mix seat types; improper seating can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Regular Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs may result.
- ✅ Check wheel backspacing: stock is about 4.5 inches; aftermarket wheels with less backspacing may require trimming or lift.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Ford F250 Super Duty Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford F250 Super Duty Regular Cab?
The 2002 Ford F250 Super Duty Regular Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F250 Super Duty Regular Cab have the same bolt pattern as the 2002?
The Ford F250 Super Duty Regular Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Can I use spacers on my 2002 Ford F250 Super Duty Regular Cab?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 124.9mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2002 Ford F250 Super Duty Regular Cab?
The factory center bore (hub bore) for the 2002 Ford F250 Super Duty Regular Cab is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2002 Ford F250 Super Duty Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2002 Ford F250 Super Duty Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 40mm, and a center bore of at least 124.9mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset