2011 Ford Fiesta Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Ford Fiesta, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Fiesta — Year-Specific Fitment Context
The 2011 model year marks the beginning of the Ford Fiesta's 4x108 bolt pattern era, which continued through 2019 (9 consecutive years). Wheels from any 2011–2019 Ford Fiesta are cross-compatible with the 2011 model.
Ford Fiesta Bolt Pattern by Year
The table below shows how the Fiesta's wheel specifications have changed over the years. The 2011 model year is highlighted.
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
Expert Buying Guide for 2011 Ford Fiesta
The 2011 Ford Fiesta uses a 4x108 bolt pattern with a 63.4mm center bore and 48mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball-seat nuts as specified. Avoid using incorrect lug nuts, as they can loosen or damage the wheel. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Fiesta appears from 2011 to 2019 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-100 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 63.4mm; use hub-centric rings if larger.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is lower than 48mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Ford Fiesta — Frequently Asked Questions
What is the bolt pattern for a 2011 Ford Fiesta?
The 2011 Ford Fiesta uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 48mm.
What other years of Ford Fiesta have the same bolt pattern as the 2011?
The Ford Fiesta uses the 4x108 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another Ford fit my 2011 Fiesta?
Only if they share the exact same 4x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Can I use spacers on my 2011 Ford Fiesta?
Yes, but ensure the wheel spacers match the 4x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Can I put aftermarket wheels on my 2011 Ford Fiesta?
Absolutely. Just ensure the aftermarket wheels have a 4x108 bolt pattern, an offset near 48mm, and a center bore of at least 63.4mm (using hub rings if larger).
Do 2011 Ford Fiestas use lug bolts or lug nuts?
The 2011 Fiesta requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset