2017 Ford Fiesta Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Ford Fiesta, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 Fiesta — Year-Specific Fitment Context
The 2017 Ford Fiesta is in year 7 of 9 using the 4x108 pattern (2011–2019). Wheels from any 2011–2019 Ford Fiesta are cross-compatible with the 2017 model.
Ford Fiesta Bolt Pattern by Year
The table below shows how the Fiesta's wheel specifications have changed over the years. The 2017 model year is highlighted.
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
Expert Buying Guide for 2017 Ford Fiesta
The 2017 Ford Fiesta uses a 4x108 bolt pattern with a 63.4mm center bore and 48mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; staying within 48mm ±5mm avoids rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) seat lug nuts for aftermarket wheels. Failure to match can cause wheel loosening. Cross-compatible with 2011–2019 Fiesta models.
Historical Fitment Data Reference
In our dataset, Ford Fiesta appears from 2011 to 2019 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a larger center bore without hub-centric rings; vibrations may occur.
- ✅ Check for brake caliper clearance when using wheels with offset below 43mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Ford Fiesta — Frequently Asked Questions
What is the bolt pattern for a 2017 Ford Fiesta?
The 2017 Ford Fiesta uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 48mm.
What other years of Ford Fiesta have the same bolt pattern as the 2017?
The Ford Fiesta uses the 4x108 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What does 48mm offset mean for the 2017 Fiesta?
An offset of 48mm means the wheel's mounting surface is 48mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How tight should I torque the lug nuts on a 2017 Ford Fiesta?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2017 Ford Fiesta?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Fiesta, the PCD is 4x108.
What lug nut size does the 2017 Ford Fiesta use?
The 2017 Ford Fiesta uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset