2020 Ford Fusion Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ford Fusion Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Fusion Plug-in Hybrid — Year-Specific Fitment Context
The 2020 is the only model year of the Ford Fusion Plug-in Hybrid in our database using the 5x108 bolt pattern.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2020 Ford Fusion Plug-in Hybrid
For the 2020 Ford Fusion Plug-in Hybrid, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels must have a 63.4mm hub bore or use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. The offset is sensitive; stock is 50mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat (conical 60-degree for most aftermarket wheels). Never mix seat types—using ball-seat nuts on conical wheels is dangerous. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford Fusion Plug-in Hybrid appears from 2020 to 2020 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ Verify aftermarket wheels have a 63.4mm hub bore or use hub-centric rings; avoid lug-centric fitment.
- ✅ Check inner clearance for brake calipers and suspension components when changing offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ford Fusion Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2020 Ford Fusion Plug-in Hybrid?
The 2020 Ford Fusion Plug-in Hybrid uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
How tight should I torque the lug nuts on a 2020 Ford Fusion Plug-in Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2020 Ford?
The 2020 Fusion Plug-in Hybrid uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2020 Ford Fusion Plug-in Hybrid?
The factory center bore (hub bore) for the 2020 Ford Fusion Plug-in Hybrid is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2020 Ford Fusion Plug-in Hybrid use?
The 2020 Ford Fusion Plug-in Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2020 Ford Fusion Plug-in Hybrids use lug bolts or lug nuts?
The 2020 Fusion Plug-in Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset