2015 Land Rover LR2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Land Rover LR2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2015 LR2 — Year-Specific Fitment Context
The 2015 model year is the final year of the Land Rover LR2's 5x108 bolt pattern run (since 2008). Wheels from any 2008–2015 Land Rover LR2 are cross-compatible with the 2015 model.
Land Rover LR2 Bolt Pattern by Year
The table below shows how the LR2's wheel specifications have changed over the years. The 2015 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2015 Land Rover LR2
For your 2015 Land Rover LR2, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay close to 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type—typically ball seat for OEM wheels, but aftermarket wheels may require conical (60-degree) or ball seat. Verify thread engagement and torque to manufacturer specs. Improper fitment compromises safety and drivability.
Historical Fitment Data Reference
In our dataset, Land Rover LR2 appears from 2008 to 2015 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using aftermarket wheels; some designs may interfere with the LR2's brake calipers.
- ✅ Avoid using universal fitment wheels without hub-centric rings; the LR2 is sensitive to hub-centricity.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Land Rover LR2 — Frequently Asked Questions
What is the bolt pattern for a 2015 Land Rover LR2?
The 2015 Land Rover LR2 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Land Rover LR2 have the same bolt pattern as the 2015?
The Land Rover LR2 uses the 5x108 pattern from 2008 through 2015. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2015 Land Rover LR2?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2015 Land Rover LR2?
The factory center bore (hub bore) for the 2015 Land Rover LR2 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 45mm offset mean for the 2015 LR2?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Land Rover.
What is the factory wheel offset for a 2015 Land Rover LR2?
The OEM offset for the 2015 LR2 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset