2013 Land Rover LR2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Land Rover LR2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 LR2 — Year-Specific Fitment Context
The 2013 Land Rover LR2 is in year 6 of 8 using the 5x108 pattern (2008–2015). Wheels from any 2008–2015 Land Rover LR2 are cross-compatible with the 2013 model.
Land Rover LR2 Bolt Pattern by Year
The table below shows how the LR2's wheel specifications have changed over the years. The 2013 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Land Rover LR2
For the 2013 Land Rover LR2, the correct bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory offset is 45mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a cone seat. Using the wrong seat can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Land Rover LR2 appears from 2008 to 2015 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 lb-ft after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 63.4mm and outer diameter matches the wheel's hub bore.
- ✅ Avoid using wheels with offset below 40mm or above 50mm to prevent suspension or fender contact.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Land Rover LR2 — Frequently Asked Questions
What is the bolt pattern for a 2013 Land Rover LR2?
The 2013 Land Rover LR2 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Land Rover LR2 have the same bolt pattern as the 2013?
The Land Rover LR2 uses the 5x108 pattern from 2008 through 2015. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Do 2013 Land Rover LR2s use lug bolts or lug nuts?
The 2013 LR2 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2013 Land Rover LR2?
The OEM offset for the 2013 LR2 is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2013 Land Rover LR2 use?
The 2013 Land Rover LR2 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2013 Land Rover LR2?
The factory center bore (hub bore) for the 2013 Land Rover LR2 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset