2012 Land Rover LR2 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Land Rover LR2, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2012 LR2 — Year-Specific Fitment Context
The 2012 Land Rover LR2 is in year 5 of 8 using the 5x108 pattern (2008–2015). Wheels from any 2008–2015 Land Rover LR2 are cross-compatible with the 2012 model.
Land Rover LR2 Bolt Pattern by Year
The table below shows how the LR2's wheel specifications have changed over the years. The 2012 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2012 Land Rover LR2
For your 2012 Land Rover LR2, the 5x108 bolt pattern is shared with 2008–2015 models, but the 63.4mm center bore is critical. Aftermarket wheels often have a larger bore; use hub-centric rings to avoid vibrations and ensure proper load transfer. Offset is sensitive: the factory 45mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a ball seat, while aftermarket may require conical (60-degree) or ball seat. Never mix seat types; improper seating can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Land Rover LR2 appears from 2008 to 2015 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify that the wheel's hub bore is at least 63.4mm and use hub-centric rings if larger.
- ✅ Check brake caliper clearance when changing offset; the LR2 has tight tolerances, especially with larger wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Land Rover LR2 — Frequently Asked Questions
What is the bolt pattern for a 2012 Land Rover LR2?
The 2012 Land Rover LR2 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Land Rover LR2 have the same bolt pattern as the 2012?
The Land Rover LR2 uses the 5x108 pattern from 2008 through 2015. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2012 Land Rover LR2?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45mm, and a center bore of at least 63.4mm (using hub rings if larger).
What does 45mm offset mean for the 2012 LR2?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Land Rover.
What lug nut size does the 2012 Land Rover LR2 use?
The 2012 Land Rover LR2 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Land Rover fit my 2012 LR2?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset