2013 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Fusion — Year-Specific Fitment Context
The 2013 model year marks the beginning of the Ford Fusion's 5x108 bolt pattern era, which continued through 2020 (8 consecutive years). Wheels from any 2013–2020 Ford Fusion are cross-compatible with the 2013 model. Note: the 2012 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2013. Across its full production run (2006–2020), the Fusion has also used: 5x114.3.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| ▸ 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2013 Ford Fusion
For the 2013 Ford Fusion, the bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure they match the 5x108 pattern and use hub-centric rings if the wheel's center bore is larger than 63.4mm to prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to ensure proper clamping force. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles of driving.
- ✅ Wheels from 2013-2020 Ford Fusion are direct fit; avoid 2012 or earlier models (5x114.3).
- ✅ Check brake caliper clearance when using wheels with offset below 45mm or above 55mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford Fusion?
The 2013 Ford Fusion uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Fusion have the same bolt pattern as the 2013?
The Ford Fusion uses the 5x108 pattern from 2013 through 2020. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I use 2012 Ford Fusion wheels on a 2013?
No. The 2012 Fusion used a 5x114.3 bolt pattern, which differs from the 2013's 5x108. They are not interchangeable.
Do 2013 Ford Fusions use lug bolts or lug nuts?
The 2013 Fusion requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2013 Ford Fusion?
The factory center bore (hub bore) for the 2013 Ford Fusion is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2013 Ford?
The 2013 Fusion uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset