2019 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Fusion — Year-Specific Fitment Context
The 2019 Ford Fusion is in year 7 of 8 using the 5x108 pattern (2013–2020). Wheels from any 2013–2020 Ford Fusion are cross-compatible with the 2019 model. Across its full production run (2006–2020), the Fusion has also used: 5x114.3.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| ▸ 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2019 Ford Fusion
For the 2019 Ford Fusion, the bolt pattern is 5x108 with a 63.4mm center bore. Aftermarket wheels must match the bore exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with 12x1.5 thread pitch and the correct seat type (conical/60-degree for most aftermarket wheels, ball seat for some OEM). Improper lug nut seating can lead to wheel detachment. Wheels from 2013–2020 Fusion models are direct fit. Avoid wheels designed for the 5x114.3 pattern used in earlier models.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Verify wheel offset using a test fit; 50mm offset is optimal, but 45–55mm may work with careful clearance checks.
- ✅ Ensure aftermarket wheels include hub-centric rings sized to 63.4mm to avoid vibration and stress on studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2019 Ford Fusion?
The 2019 Ford Fusion uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Fusion have the same bolt pattern as the 2019?
The Ford Fusion uses the 5x108 pattern from 2013 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Why is matching the 63.4mm center bore important for the 2019 Fusion?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2019 Ford Fusion?
The OEM offset for the 2019 Fusion is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2019 Ford Fusion use?
The 2019 Ford Fusion uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2019 Ford Fusion?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset