2015 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 Fusion — Year-Specific Fitment Context
The 2015 Ford Fusion is in year 3 of 8 using the 5x108 pattern (2013–2020). Wheels from any 2013–2020 Ford Fusion are cross-compatible with the 2015 model. Across its full production run (2006–2020), the Fusion has also used: 5x114.3.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| ▸ 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2015 Ford Fusion
For your 2015 Ford Fusion, the bolt pattern is 5x108 with a 63.4mm center bore. When selecting aftermarket wheels, ensure they have a center bore of at least 63.4mm; use hub-centric rings to avoid vibrations. The factory offset is 50mm; offsets between 45-55mm typically fit without rubbing, but verify clearance with your tire size. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical 60-degree). Improper lug nuts can cause wheel loosening. Wheels from 2013-2020 Fusion models are direct fit. Avoid 5x114.3 wheels without adapters.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving.
- ✅ Check brake caliper clearance with aftermarket wheels; some designs may require spacers.
- ✅ Verify that aftermarket wheels include hub-centric rings for the 63.4mm bore to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2015 Ford Fusion?
The 2015 Ford Fusion uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Fusion have the same bolt pattern as the 2015?
The Ford Fusion uses the 5x108 pattern from 2013 through 2020. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Can I use spacers on my 2015 Ford Fusion?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 2015 Ford Fusion?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 50mm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the factory wheel offset for a 2015 Ford Fusion?
The OEM offset for the 2015 Fusion is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2015 Ford Fusion?
The factory center bore (hub bore) for the 2015 Ford Fusion is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset