2008 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Fusion — Year-Specific Fitment Context
The 2008 Ford Fusion is in year 3 of 7 using the 5x114.3 pattern (2006–2012). Wheels from any 2006–2012 Ford Fusion are cross-compatible with the 2008 model. Across its full production run (2006–2020), the Fusion has also used: 5x108.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| ▸ 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Ford Fusion
For your 2008 Ford Fusion, the correct bolt pattern is 5x114.3mm, but the center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels often have a larger bore (73.1mm common), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 44mm, but 38–50mm can work with careful checking for strut or fender clearance. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque after 50–100 miles. Avoid wheels from 2013+ Fusion (5x108 pattern) or other Ford models with different offsets.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm to prevent vibration and ensure proper load distribution.
- ✅ Re-torque lug nuts to 85–100 ft-lbs after 50–100 miles of driving, as wheels can settle and loosen.
- ✅ Double-check offset: 44mm is ideal; offsets below 38mm may rub the fender, and above 50mm may contact the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Fusion?
The 2008 Ford Fusion uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Ford Fusion have the same bolt pattern as the 2008?
The Ford Fusion uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Ford Fusion?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2008 Ford Fusion?
The OEM offset for the 2008 Fusion is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 44mm offset mean for the 2008 Fusion?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 2008 Ford?
The 2008 Fusion uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset