2010 Ford Fusion Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford Fusion, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Fusion — Year-Specific Fitment Context
The 2010 Ford Fusion is in year 5 of 7 using the 5x114.3 pattern (2006–2012). Wheels from any 2006–2012 Ford Fusion are cross-compatible with the 2010 model. Across its full production run (2006–2020), the Fusion has also used: 5x108.
Ford Fusion Bolt Pattern by Year
The table below shows how the Fusion's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 67.1 | 44 |
| 2007 | 5x114.3 | 67.1 | 44 |
| 2008 | 5x114.3 | 67.1 | 44 |
| 2009 | 5x114.3 | 67.1 | 44 |
| ▸ 2010 | 5x114.3 | 67.1 | 44 |
| 2011 | 5x114.3 | 67.1 | 44 |
| 2012 | 5x114.3 | 67.1 | 44 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.4 | 50 |
| 2020 | 5x108 | 63.4 | 50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Ford Fusion
For your 2010 Ford Fusion, the bolt pattern is 5x114.3 with a center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to wheel bore OD) are essential to prevent vibrations and ensure proper load transfer. The factory offset is 44mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford Fusion appears from 2006 to 2020 (15 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 35mm or above 50mm to prevent rubbing or clearance issues.
- ✅ Ensure aftermarket wheels have a center bore larger than 67.1mm and use hub-centric rings to match.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Ford Fusion — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford Fusion?
The 2010 Ford Fusion uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Ford Fusion have the same bolt pattern as the 2010?
The Ford Fusion uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Ford Fusion?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Fusion, the PCD is 5x114.3.
Why is matching the 67.1mm center bore important for the 2010 Fusion?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2010 Ford Fusion?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What does 44mm offset mean for the 2010 Fusion?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset